Search

Fall 2011

Lin, Fangjian

Slurry stability is an important factor in Chemical Mechanical Polishing (CMP) efficiency. However, few studies have been done in this respect. In settling tests at pH 4, adding various amounts of ceria to colloidal silica slurries was shown to change the stability of the resulted mixed abrasive...

Spring 2020

He, Xiao

The emulsions, either oil-in-water (O/W) or water-in-oil (W/O) emulsions, are inevitably formed during the industrial production processes and the daily household activities. The O/W emulsions such as crude oil-in-water emulsions or oily wastewaters generated from the industrial fields, oil...

Spring 2010

Zheng, Haijun

Filtration performance of mineral concentrate is mainly controlled by solid particle size and surface hydrophobicity. Filtration of coarser particles with more hydrophobic surfaces produces better filtration performance characterized by higher filtration rate (U) and lower final moisture content...

Fall 2014

Kaura, Aditya

Management of oil sands tailings from bitumen extraction operations remains a challenge for mineable oil sands producers. Promoting fine solids settling in tailings ponds is key to treating oil sands tailings. Present study explores two methods of tailings treatment – ATA process and polymer...

Spring 2019

Hosseini Anvari, Monir

Interfacial properties have a regulatory role in processes which involve the coexistence of different phases. Although such macro-scale properties are determined by the intrinsic nature of the interface-sharing phases, it is possible to alter them in favor of the process objectives. This,...

Spring 2011

Javaheri, Ali

The demand for a new solvent to treat oilsands was behind the purpose of this project; molecular dynamics simulation was used in this study. Supercritical water, supercritical carbon dioxide and other selected organic solvents in their supercritical state were studied. Meso-tetraphenyl porphyrin...

Fall 2019

Li,Rui

The spontaneous displacement of a fluid in another immiscible one on a solid surface is essential for many technical applications, such as painting, detergency, bitumen extraction and enhancing oil recovery. This project was motivated by exploring a process of high viscosity bitumen displaced by...

Fall 2016

Curran, Meghan D

Caustic is the most commonly used process aid to improve processability of mineable oil sands ores in the Athabasca region. The addition of caustic adjusts the pH of the extraction process, disperses clays, and acts as a water softener. Understanding how these changes affect the fundamental...

Spring 2013

Wang, Shiqing

Two inorganic-organic hybrid polymers, Al(OH)3-polyacrylamide (Al-PAM) and Fe(OH)3-polyacrylamide (Fe-PAM) were synthesized and used in flocculating model tailings (5 wt% kaolin suspensions) and laboratory extraction tailings. For comparison, a commercial anionic flocculant, partially hydrolyzed...

Spring 2013

Ansari, Nesma Nasir

Solvents are ubiquitously used in oil sands extraction industry to enhance the separation of bitumen froth. With developing new technologies such as non-aqueous bitumen extraction, the need to track solvent interactions with oil sands components throughout the extraction process and to identify...