Search
Skip to Search Results- 2Arefi, Afshin
- 2Bagheri, Pooya
- 2Banerjee, Bitan
- 2Barczyk, Martin
- 2Barth, Stuart E
- 2Behnam Dehkordi, Mohammad
- 19Machine Learning
- 16Glancing angle deposition
- 15Wireless communication systems.
- 13Nanotechnology
- 12FPGA
- 12MIMO
- 20Musilek, Petr (Electrical and Computer Engineering)
- 20Tellambura, Chintha (Electrical and Computer Engineering)
- 19Ardakani, Masoud (Electrical and Computer Engineering)
- 19Chen, Tongwen (Electrical and Computer Engineering)
- 19Li, Yunwei (Electrical and Computer Engineering)
- 19Reformat, Marek (Electrical and Computer Engineering)
-
Fall 2014
In distributed sensing systems, measurements from a random process or parameter are usually not available in one place. Also, the processing resources are distributed over the network. This distributed characteristic of such sensing systems demands for special attention when an estimation or...
-
Distributed Event Triggered Control, Estimation, and Optimization for Cyber-Physical Systems
DownloadFall 2014
A cyber-physical system (CPS) is a system in which computational systems interact with physical processes. Control systems in a CPS application often include algorithms that react to sensor data by issuing control signals via actuators to the physical components of the CPS. Communication over...
-
Fall 2015
The main goal of this thesis is to develop an opportunistic scheduling strategy in distributed networks with decode-and-forward (DF) relays without direct link. Two cases are considered: 1) the winner source has full CSI (CSI of source-relay link and relay-destination link), 2) the winner source...
-
Spring 2014
A wireless sensor network (WSN) consists of spatially distributed sensor nodes which are deployed to monitor some process of interest. Although WSNs are very promising, the distributed nature, attributes of wireless networks, and availability of limited resources in WSNs introduce significant...
-
Spring 2013
Utility companies have benefited from the use of condition monitoring to optimize the performance of their assets and enhance power system reliability. This thesis starts with a review of different applications of condition monitoring in a distribution system, and one of the findings is that...
-
Fall 2011
Employing disturbance observers is an effective way of enhancing the stability and performance of the control systems subject to disturbances. Disturbance observers have been extensively used for control of mechatronic systems since their introduction in the 1980s. This thesis studies the...
-
Fall 2021
Motion control of multirotor Unmanned Aerial Vehicles (UAV) is an area of research which continues to generate significant interest in the community. Being able to accurately follow a broad class of trajectories clearly improves the mission capabilities of the vehicle. Model uncertainty and...
-
Fall 2015
Software testing is an expensive task that consumes around half of a project’s effort. To reduce the cost of testing and improve the software quality, test cases can be produced automatically. Random Testing (RT) is a low cost and straightforward automated test generation approach. However, its...
-
DNA-assisted Heterogeneous Integration of Micro- and Nanoelectronic Devices: Modeling, Control, and Rational Design of Selective Attachment
DownloadSpring 2018
Heterogeneous integration is an electronic packaging approach that enables the fabrication and assembly of complete electronic subsystems from components fabricated with different substrates and processes. Current commercial techniques like robotic pick-and-place, fluidic self-assembly, and...
-
DSP Based Realization of Pre-Processed Discontinuous PWM Schemes for 3-Limb Core Coupled Inductor Inverters
DownloadFall 2015
The design of most power electronic systems is ultimately linked to the devices being used, the system efficiency and the system cost. A Digital Signal Processor (DSP) based 3-phase Pulse Width Modulation (PWM) switching scheme for a 3-Limb Core Coupled Inductor Inverter (CII) is presented as a...