Search
Skip to Search Results- 44Xu, Zhenghe (Chemical and Materials Engineering)
- 10Liu, Qingxia (Chemical and Materials Engineering)
- 9Masliyah, Jacob (Chemical and Materials Engineering)
- 3Choi, Phillip (Chemical and Materials Engineering)
- 2Masliyah, Jacob H. (Chemical and Materials Engineering)
- 1Afacan, Artin (Chemical and Materials Engineering)
- 1Adegoroye, Adebukola
- 1Ansari, Nesma Nasir
- 1Bobicki, Erin R.
- 1Chan, Margo Chi Wing
- 1Chowdhry, Manjeet
- 1Curran, Meghan D
-
Spring 2013
As one of the most critical steps to recover valuable particles from a slurry using flotation, knowledge of the drainage of the thin liquid film between an air bubble and a solid surface is required. The main focus of this thesis is to develop and use an integrated thin film drainage appratus...
-
Study on Adsorption of Inorganic-organic Hybrid Polymers and Flocculation of Oil Sands Tailings
DownloadSpring 2013
Two inorganic-organic hybrid polymers, Al(OH)3-polyacrylamide (Al-PAM) and Fe(OH)3-polyacrylamide (Fe-PAM) were synthesized and used in flocculating model tailings (5 wt% kaolin suspensions) and laboratory extraction tailings. For comparison, a commercial anionic flocculant, partially hydrolyzed...
-
Spring 2013
Solvents are ubiquitously used in oil sands extraction industry to enhance the separation of bitumen froth. With developing new technologies such as non-aqueous bitumen extraction, the need to track solvent interactions with oil sands components throughout the extraction process and to identify...
-
Fall 2012
Two major kinds of natural surfactants are released during oil sands extraction: carboxylic acids (naphthenic acids) and sulfonic acids. In this study, commercial surfactants were used as standards to establish the suitable analytical methods with optimized experimental and instrumental...
-
Understanding the Role of Caustic Addition: A Comparison of Sodium Hydroxide and Ammonium Hydroxide
DownloadSpring 2012
To understand the role of caustic addition and its effect on the bitumen extraction process, a novel flow cell and a Denver Cell extraction unit were utilized. This allowed for the comparison of sodium hydroxide and ammonium hydroxides effect on real oil sands ores. Several ores (A1, C-ore,...
-
Fall 2012
Stabilization of water droplets in froth treatment process results in poor de-watering efficiency and potentially affects final bitumen quality. The purpose of this research is to study the effect of solid contamination by diluted bitumen on water droplet stabilization in water in oil emulsions....
-
A fundamental study of bubble-particle interactions through zeta-potential distribution analysis
DownloadSpring 2011
Understanding the mechanism of bubble-particle interactions plays a critical role in advancing flotation technology. In this study, submicron size bubbles with an average diameter less than 1 μm and a life time of at least several hours were generated using a novel hydrodynamic cavitation method....
-
Fall 2011
A cationic thermal sensitive polymer, polyN-isopropylacrylamide-co-N-[3-(Dimethylamino)propyl]methacrylamide (CP) of different molar ratios, known as CP05 and CP10 was synthesized in-house. By doping aluminum hydroxide (Al(OH)3) colloids into CP during the polymerization process, a novel hybrid...
-
Fall 2011
This project was initiated to study the H2S removal process from liquid sulfur and later extended to generic liquid degassing scenarios. Enersul HyspecTM Degassing Process was first field tested so that comparison could be made with new units to be engineered. Two new degassing units were...
-
A study of the colloidal stability of mixed abrasive slurries of silica and ceria nanoparticles for chemical mechanical polishing
DownloadFall 2011
Slurry stability is an important factor in Chemical Mechanical Polishing (CMP) efficiency. However, few studies have been done in this respect. In settling tests at pH 4, adding various amounts of ceria to colloidal silica slurries was shown to change the stability of the resulted mixed abrasive...