Search
Skip to Search Results- 1ALBAHLANI, ALMUATASIM MOHAMMED
- 1Alizadehgiashi, Moien
- 1Athar, Khan S
- 1Atrin Tavakoli
- 1Azhin, Maryam
- 1Bansal, Hemant
- 11Department of Chemical and Materials Engineering
- 7Department of Civil and Environmental Engineering
- 6Department of Mechanical Engineering
- 5Department of Electrical and Computer Engineering
- 4Department of Physics
- 1Civil and Environmental Engineering
- 2Babadagli, Tayfun (Department of Civil and Environmental Engineering)
- 2Beaulieu, Christian (Biomedical Engineering)
- 2Deutsch, Clayton (Civil and Environmental Engineering)
- 2Heimpel, Moritz (Physics)
- 2Jing, Yindi (Electrical and Computer Engineering)
- 2Lange, Carlos (Mechanical Engineering)
-
Lab to Field Scale Modeling of Low Temperature Air Injection with Hydrocarbon Solvents for Heavy-Oil Recovery in Naturally Fractured Reservoirs
DownloadFall 2015
Alternatives for enhanced oil recovery processes in heavy oil containing deep naturally fractured reservoirs (NFR) are limited due to excessive heat losses when steam is injected. Air injection at high temperature oxidation conditions (in-situ combustion) has been considered as an alternative to...
-
Fall 2015
Athabasca Bitumen and other heavy hydrocarbon resources are high-mean-molar-mass and structured organic materials with complex phase behaviors at the nano- and micro- meter length scales. Diffusion of light hydrocarbons, and non-hydrocarbons in these resources is of significant interest as new...
-
Fall 2014
Diffusion magnetic resonance imaging (dMRI) measures the diffusion (i.e. random molecular motion) of water. Since the motion of water is inhibited by cellular membranes, dMRI provides insight into the microstructural characteristics of the tissue. However, distinguishing between small anatomical...
-
Fall 2014
A 90 mm diameter methanol pool fire was investigated experimentally and analytically. Aiming for well-defined experiments and understanding the physics of the involved transport processes, the liquid-side boundary conditions including the pool’s bottom temperature the wall thermal conductivity...
-
Spring 2014
This thesis focuses on the power allocation during the channel training process for three cooperative relay networks: a one-way single-relay network, a one-way multi-relay network and a two-way single-relay network. For these three networks, under the amplify-and-forward (AF) scheme, we...
-
Fall 2014
Multi-input-multi-output (MIMO) system, due to its large channel capacity and high reliability, has been widely studied in numerous existing work. It has a lot of applications in reality, e.g., 3GPP and LTE standards. These advantages owes to the understanding of the MIMO channel, which shows the...
-
Spring 2014
Consider an open control volume consisting of a porous medium submerged in a surrounding ambient fluid of density ρa. The top and bottom of the control volume allow ambient fluid to enter the porous medium. Saline fluid of density ρs>ρa is supplied at a constant rate of Qo near the top of the...
-
Applications of nonautonomous infinite-dimensional systems control theory for parabolic PDEs
DownloadFall 2013
Parabolic partial differential equations (PDEs) are used as models of transport-reaction phenomena in a variety of different industrial chemical and materials engineering processes, and can yield precise descriptions of process variables with complex temporal and spatially dependent system...
-
Fall 2013
In the development of a numerical model for the water cycle on Mars, adsorption of water vapour in the Martian regolith acts as a significant sink and retards the transport of mass. Adsorption on Mars cannot be studied directly, so a numerical model was created, and a diffusion sorption...
-
The Effect of Conventional Elastomers on Force and Moment of a Self-Ligating Orthodontic Bracket with Second-Order Angulation in the Dry and Wet States evaluated through a new 3D Friction Device
DownloadSpring 2013
Objective: A new three-dimensional friction device was used to investigate the effect of conventional elastomers on force and moment of a self-ligating orthodontic bracket with second-order angulation during a simulated retraction. Methods: An 0.018x0.025-in stainless steel archwire was drawn...