Search
Skip to Search Results- 1Adesanwo, Toluwanise I J
- 1Afshar, Shima
- 1Agbor, Ezinwa U
- 1Akbarzadeh Kasani, Hossein
- 1Apan, Ioan-Tudor
- 1Chen, Huanchen
-
Dynamics of spontaneous initial spreading and spreading of a hydrodynamically driven droplet under the influence of surrounding pressure
DownloadFall 2021
We investigate experimentally the early time dynamics of spontaneous spreading of silicone oils with various viscosities at elevated surrounding pressures. The surrounding medium pressure is increased in a monotone fashion starting from atmospheric pressure to a maximum value of 30 megapascal...
-
Effect of Temperature, Phase Change, and Chemical Additive on Interfacial Properties and Performance of Steam Applications
DownloadFall 2019
When considering the wettability state during steam applications, we find that most issues remain unanswered. Removal of polar groups from the rock surface with increasing temperature improves water wettability; however, other factors, including phase change, play a reverse role. In other words,...
-
Spring 2015
Previous studies on the extraction of liquid products from coals have focused mainly on increasing the yield, with very little emphasis on the quality of the liquid products. The main goal of this study is to achieve a balance between the yield and quality of the coal derived liquids. The first...
-
Fabrication and Characterization of Photolithographically Patterned Rough Surfaces Demonstrating Extreme Contact Angle Behavior
DownloadFall 2014
This thesis features experimental work done to fabricate and characterize silicon surfaces patterned using photolithographic techniques, both standard and novel, to produce a variety of surfaces with roughness of controlled geometric properties. In specific, one set of the surfaces fabricated...
-
Fall 2011
The fragmentation of large coal particles at high temperature is important to the efficient operation of Corex process of steelmaking, which uses raw coal instead of coke. The hypothesis is that the heterogeneity within coal particles affects the fragmentation. The interface of minerals and coal...
-
Fall 2013
Solvent extraction of coal is a method to produce low molecular weight products from coal. It also can be used as a pretreatment for Direct Coal Liquefaction to enhance its efficiency. Yield, rate and nature of coal dissolution at low temperatures (25-150°C) and short contact time have been...
-
Fall 2014
An experimental facility was constructed in order to examine the feasibility of the coal bio-conversion under the application of confining pressure. The main purpose of this work was to investigate the effect of confining pressure on methane generation. Core-flooding experiments were conducted...
-
Fall 2015
Drop transfer from one solid surface to another through stretching liquid bridges between them is important for many industrial applications. Due to the different dominate forces, three possible regimes exist: Quasi-static Regime, where the transfer process is only dominated by surface forces;...
-
Spring 2012
Modelling of solvent extraction was studied using 1,2,3,4–tetrahydronaphtalene (tetralin) and Poplar coal (lignite). A kinetic model was developed taking into account temperature, mass transfer limitations and dominating events (physical or chemical) during coal liquefaction. It was found there...