Search
Skip to Search Results- 1AL-Alawi, Mubarak K
- 1Ajweh,Ziad
- 1Al-Hussein, Riphay
- 1Alanjari, Pejman
- 1Aldrich, Daniel R.
- 1Altaf, Mohammed Sadiq
- 44Department of Civil and Environmental Engineering
- 24Department of Chemical and Materials Engineering
- 20Department of Mechanical Engineering
- 10Department of Electrical and Computer Engineering
- 6Department of Earth and Atmospheric Sciences
- 5Department of Computing Science
- 5AbouRizk, Simaan (Civil and Environmental Engineering)
- 5Al-Hussein, Mohamed (Civil and Environmental Engineering)
- 3Mohamed, Yasser (Civil and Environmental Engineering)
- 3Nikolaidis, Ioanis (Computing Science)
- 2AbouRizk, Simaan (Department of Civil and Environmental Engineering)
- 2Ayranci, Cagri (Mechanical Engineering)
-
Spring 2018
Shape memory polymers (SMPs) can be used in many critical applications, including biomedical and aerospace fields, due to their ability to recover their original/permanent shape from a deformed/temporary shape upon application of a stimulus. SMPs are subjected to bending in a large number of...
-
Fall 2009
Geostatistical techniques are used to estimate recoverable reserves at unsampled locations and to quantify uncertainty. Several variables are often measured and important for reserve evaluation. Using more variables improves the quality of modeling, but quantifying the relationships between the...
-
Spring 2016
Hosseininejad, Seyed Shaham Aldin
To overcome the challenges of low recovery of fine particles in flotation processes, designing a cavitating device that can enhance the recovery has been a major topic of study. In the design of a cavitating device, the bubble/bubble interactions, bubble response to the change of local pressure,...
-
Characterization and Modeling of Natural-Fibres-Reinforced composites (Moisture Absorption Kinetics, Monotonic Behaviour and Cyclic Behaviour)
DownloadFall 2014
Natural fibres have been shown to offer a good potential in replacing or supplementing synthetic fibres in composite material applications. To fully utilize these new materials in design, however, engineering models of the mechanical behaviour need to be developed and ...
-
Characterization of natural zeolite membranes for H2/CO2 separations by single gas permeation
DownloadFall 2011
Hoseinzadeh Hejazi, Sayed Alireza
Membrane-based processes have the potential to overcome the limitations of conventional hydrogen separation techniques such as high energy consumption and environmental concerns. Natural zeolite membranes have recently been shown to demonstrate apparent molecular sieving of H2 from H2/CO2...
-
Compact and accurate hardware simulation of wireless channels for single and multiple antenna systems
DownloadFall 2009
The accurate simulation of wireless channels is important since it permits the realistic and repeatable performance measurement of wireless systems. While software simulation is a flexible method for testing hardware models, its long-running simulation time can be prohibitive in many scenarios....
-
Fall 2017
High Chromium Cast Irons (HCCIs) are widely used in mineral processing, slurry pumping and manufacturing processes, where high resistance to erosion and synergetic erosion-corrosion is required. The excellent performance of HCCIs results from their microstructure, which consists of hard carbides...
-
Fall 2016
α-Synuclein has been implicated in the progression of Parkinson’s disease, a neurodegenerative disorder that affects millions of people worldwide. This work reports on the structural propensity and druggability of this protein using a combination of Monte Carlo, Molecular Dynamics, and Virtual...
-
Computer simulation and experimental characterization of a tubular micro- solid oxide fuel cell
DownloadSpring 2010
This work is focused on a state-of-the-art tubular micro-solid oxide fuel cell (TμSOFC), ~3 millimeters in diameter and ~300 microns thick, with Ni/YSZ and LSM/YSZ composite electrodes and a YSZ electrolyte. A 2D axi-symmetric, multi-scale CFD model is developed which includes the fluid flow,...
-
Fall 2016
Site layout planning, which involves identifying sizes and locations of temporary facilities, can have significant impacts on the safety, cost, time, and productivity of projects. Despite considerable research undertaken to improve efficiency of planning construction site layouts, most models...