Search
Skip to Search Results- 1Afshar, Shima
- 1Aghaie, Ermia
- 1Akbarzadeh Kasani, Hossein
- 1Amani, Mohammad Javad
- 1Anas Khalil Sidahmed
- 1Ashrafi Moghadam, Alireza
- 48Department of Chemical and Materials Engineering
- 27Department of Civil and Environmental Engineering
- 10Department of Mechanical Engineering
- 9Department of Earth and Atmospheric Sciences
- 5Department of Renewable Resources
- 3Department of Chemistry
- 5Xu, Zhenghe (Chemical and Materials Engineering)
- 4De Klerk, Arno (Chemical and Materials Engineering)
- 3Bindiganavile, Vivek (Civil and Environmental Engineering)
- 2Amirfazli, Alidad (Mechanical Engineering)
- 2Chalaturnyk, Rick (Civil and Environmental Engineering)
- 2Froese, Duane (Earth and Atmospheric Sciences)
-
Spring 2019
This thesis aims to demonstrate the feasibility of using System Dynamics (SD) techniques to develop a transparent, open-source and reproducible model capable of simulating long-term soil water dynamics in a tailings-cap system subject to upward flux from a consolidating tailings substrate. The...
-
Development of an Experimental Apparatus for Studying the Effects of Acoustic Excitation on Viscosity
DownloadFall 2012
An experimental apparatus was developed capable of measuring changes in fluid viscosity occurring due to acoustic stimulation. Controls allowed measurements at simulated oil sand reservoir pressures and temperatures with near real-time data visualization. Calibration was performed...
-
Development of an experimental setup for measuring vacuum decay in dual-wall fiber-reinforced composite pipes
DownloadFall 2010
Thermal management and energy input are required to maintain working fluids, i.e., liquefied natural gas, liquid nitrogen, and multi-phase fluids within their optimal working conditions. Increasing a pipes’ thermal resistance, e.g., utilizing vacuum insulation, is one method of minimizing energy...
-
Development of Solvent Selection Criteria Based on Diffusion Rate, Mixing Quality, and Solvent Retrieval for Optimal Heavy-Oil and Bitumen Recovery at Different Temperatures
DownloadFall 2015
Heavy-oil and bitumen recovery requires high recovery factors to offset the extreme high cost of the process. Attention has been given to solvent injection for this purpose and it has been observed that high recoveries are achievable when combined with steam injection. Heavier (“liquid”) solvents...
-
Fall 2020
Concerns over the environmental impacts of thermal production methods for bitumen and heavy oil have led to the exploration of alternative technologies including solvent-assisted production methods. While solvent-assisted production methods have been studied extensively, apparent diffusion rates...
-
Spring 2013
Removal of a drop from its substrate may be gradually (e.g. evaporation) or all at once (e.g. shedding). In this thesis, drop adhesion force as a base for understanding the all at once removal of a drop from its substrate, and drop evaporation in room temperature as one of the gradual removal...
-
Dynamics of spontaneous initial spreading and spreading of a hydrodynamically driven droplet under the influence of surrounding pressure
DownloadFall 2021
We investigate experimentally the early time dynamics of spontaneous spreading of silicone oils with various viscosities at elevated surrounding pressures. The surrounding medium pressure is increased in a monotone fashion starting from atmospheric pressure to a maximum value of 30 megapascal...
-
Effect of Cellulose Nanocrystal Particles on Rheology, Transport and Mechanical Properties of Oil Well Cement Systems
DownloadSpring 2018
The increase in oil consumption during the past few decades, coupled with oil/gas extraction from shale in the recent years has increased drilling and cementing demands. Well cementing operation is one of the most crucial and important steps in any well completion. However, since it takes place...
-
Spring 2013
The durability of concrete is one of its most important properties and has been an attractive subject for research in recent years. One of the criteria that affect concrete durability is permeability. Transport processes in concrete have been investigated for several decades. However, the...
-
Fall 2009
The extraction of bitumen (heavy oil) from the oil sands is predominantly achieved through a water-based technology. This involves a slurrying process, typically called conditioning, which is categorized into three equally important steps: bitumen-sand liberation, bitumen coalescence, and...