Search
Skip to Search Results- 1Ahmed, Nirob
- 1Ali, Mohamed Ali Hassan
- 1Amundarain, Jesus
- 1Ansari, Nesma Nasir
- 1Berahman, Behnam
- 1Cardozo, Samuel D.
- 6Xu, Zhenghe (Chemical and Materials Engineering)
- 3Gupta, Rajender (Chemical and Materials Engineering)
- 3Liu, Qingxia (Chemical and Materials Engineering)
- 3Zeng, Hongbo (Chemical and Materials Engineering)
- 2Gray, Murray (Chemical and Materials Engineering)
- 2Gray, Murray R. (Chemical and Materials Engineering)
-
Fall 2015
Oil sands found in Athabasca and Cold Lake regions of Northern Alberta form Canada’s primary source of energy reserves. Asphaltenes, a significant part of bitumen is often considered to be the least valuable component of crude oil due to various factors such as difficulty in transporting and...
-
Spring 2016
During the extraction of crude oil or bitumen, stable water-in-oil emulsions are inevitably formed. The emulsified water contains chloride ions and other organic acidic compounds that cause severe corrosion problems to the downstream plant equipment, creating operational and safety issues and...
-
Spring 2015
The minable oil sands extraction process can be understood on a scale of a single oil sand grain. When the oil sand ore is mixed with warm water, each sand granule is initially covered with bitumen film which ruptures under the composite effect of shear and interfacial forces, while water...
-
Fall 2011
The growing interest in the oilsands bitumen reserves, a large portion of which is unattainable by current industrial processes, has generated a need for an improved process for oilsands extracting and upgrading. The effects of using chabazite as a catalyst for cracking and upgrading of oilsands...
-
Characterization of asphaltene molecular structures by cracking under hydrogenation conditions and prediction of the viscosity reduction from visbreaking of heavy oils
DownloadSpring 2013
The chemical building blocks that comprise petroleum asphaltenes were determined by cracking samples under conditions that minimized alterations to aromatic and cycloalkyl groups. Hydrogenation conditions that used tetralin as hydrogen-donor solvent, with an iron-based catalyst, allowed...
-
Characterization of Athabasca asphaltenes separated physically and chemically using small-angle X-ray scattering
DownloadFall 2010
Athabasca asphaltenes were characterized using small-angle X-ray scattering (SAXS) with synchrotron radiation. Two methods were used to separate asphaltenes from Athabasca bitumen. Conventional chemical separation by precipitation with n-pentane, and physical separation realized by passing...
-
Fall 2009
In this study, we describe the use of different silica materials to separate vanadium compounds from Asphaltenes. We used high performance flash chromatography separation method to separate asphaltenes at different solvent strengths on sea sand. The separation conditions were optimized for flow...
-
Fall 2010
Agglomerate formation is a common phenomenon that can cause operating problems in the fluid coking reactor. When agglomerates form they provide longer diffusion paths of the reaction products through the liquid layers and liquid bridges within the agglomerate, which leads to higher mass transfer...
-
Control of D-Spacing and Graphitic Defects in Asphaltene-Derived Hard Carbons for Energy Storage
DownloadSpring 2024
With the increasing demand for energy storage and declining lithium stores around the globe, sodium is emerging as an alternative source due to its natural abundance and similar reaction kinetics and chemical properties to lithium. While sodium-ion and lithium-ion batteries started development at...
-
Spring 2015
This thesis presents a thorough examination of the corrosion and fouling behaviour of crude oil at refining conditions on industrially applicable heat transfer surfaces. The depletion of light sweet crude oil reserves means that the processing of ever heavier and more sour crude oils is...