Search
Skip to Search Results- 1325Department of Chemical and Materials Engineering
- 3Department of Biomedical Engineering
- 2Department of Biological Sciences
- 2Department of Laboratory Medicine and Pathology
- 1Department of Civil and Environmental Engineering
- 1Department of Human Ecology
- 2Bendrich, Michelle
- 2El-Thaher, Nayef
- 2Fadic Eulefi, Anton
- 2Hoseinzadeh Hejazi, Sayed Alireza
- 2Hosseininejad, Seyed Shaham Aldin
- 2Karkooti, Amin
- 44Xu, Zhenghe (Chemical and Materials Engineering)
- 40Huang, Biao (Chemical and Materials Engineering)
- 34Liu, Qingxia (Chemical and Materials Engineering)
- 27Henein, Hani (Chemical and Materials Engineering)
- 27Zeng, Hongbo (Chemical and Materials Engineering)
- 20Gupta, Rajender (Chemical and Materials Engineering)
-
Fall 2019
The oil-based drilling fluids are mainly used to explore hydrocarbon resources. During the drilling operation, a significant amount of oil-contaminated drill cuttings, which are crushed rocks, sands and clays mixed with the drilling fluids, are transported to the surface. In order to reduce the...
-
CO2-Responsive Surfactants for Enhancing Heavy Oil Recovery: from Fundamentals to Bench-Scale Demonstrations in Canadian Oil Sands Extraction
DownloadSpring 2020
Interfacial properties at the oil-water interface are of key importance to various operations in the petroleum industry, especially in the aqueous-based heavy oil recovery process. However, different operation stages often require different interfacial properties, which could be conflicted with...
-
Coal Liquefaction Liquid Quality: Influence of Temperature and Heating Approach on Solvent Extraction of Coal
DownloadFall 2014
This project evaluated the impact of reaction temperature and of additional heating steps on the quality of the liquids obtained from solvent extraction of a lignite coal with tetralin. The points of focus were the coal liquid yield, physical properties, aromatic content and iron pyrite...
-
Fall 2020
Over the past several decades, there have been environmental concerns over anthropogenic emissions of methane, highlighting the need to minimize methane emissions. Natural gas has been employed as one of the alternatives for gasoline combustion engines. Methane is the main constituent of natural...
-
Spring 2014
Solid oxide fuel cells (SOFC) can be fuelled with external-reformed natural gas or directly with raw natural gas which usually contains significant amount of H2S to reduce the system complexity. The anode catalyst as well as the current collector employed in those environments must have excellent...
-
Fall 2010
Agglomerate formation is a common phenomenon that can cause operating problems in the fluid coking reactor. When agglomerates form they provide longer diffusion paths of the reaction products through the liquid layers and liquid bridges within the agglomerate, which leads to higher mass transfer...
-
Colloid Science of Sand Remediation: A Study Motivated by the Non-Aqueous Extraction of Bitumen from Oil Sands
DownloadFall 2014
The current water-based method of bitumen extraction requires withdrawal of fresh water from the Athabasca River — a practice which leads to the continual buildup of tailings ponds and other environmental concerns. As Alberta’s bitumen production is expected to more than double by 2020, there is...
-
Fall 2014
The non-aqueous extraction process involves dilution of mined oil sand with an organic solvent (the “diluent”), followed by separation of unwanted materials (clays, silica sand, connate water, etc.) from the diluted bitumen. The main focus of this research is on the removal of fines solids from...
-
Fall 2019
Magnetic nanoparticles (MNPs), whose positions and motions can be controlled by external magnetic fields, have been widely used and designed into applications both in academia and industries especially when dispersed in media such as colloids and hydrogels, owing to the combination of their...