Search
Skip to Search Results- 1Afshar, Shima
- 1Aghaie, Ermia
- 1Baker, Kathleen E.N.
- 1Chen, Liang
- 1Guest, Stuart Dan
- 1Mozaffari, Saeed
- 1Choi,Phillip (Chemical and Materials Engineering)
- 1Etsell, Thomas (Chemical & Materials Engineering)
- 1Gray, Murray (Chemical and Materials Engineering)
- 1Ivey, Douglas (Chemical & Materials Engineering)
- 1Kuznicki, Steve (Chemical and Materials Engineering)
- 1Lefsrud, Lianne (Chemical Engineering)
-
Fall 2017
The present research was conducted with the intent of evaluating the degradation of OCTG (Oil Country Tubular Goods) steel used in SAGD (Steam Assisted Gravity Drainage) applications, and developing a promising surface modification method and a novel composite coating using a technique that will...
-
Spring 2016
Non-aqueous extraction technologies are currently being investigated as an alternative to the conventional water based process for extracting bitumen from oil sands. The reduced dependence on fresh water and land for creation of tailing ponds makes non-aqueous technologies a greener alternative....
-
Spring 2015
The minable oil sands extraction process can be understood on a scale of a single oil sand grain. When the oil sand ore is mixed with warm water, each sand granule is initially covered with bitumen film which ruptures under the composite effect of shear and interfacial forces, while water...
-
Rheology of Bitumen at the Onset of Asphaltene Aggregation and its Effects on the Stability of Water-in-Oil Emulsion
DownloadFall 2015
Asphaltenes are the heaviest fraction of bitumen. Asphaltenes not only play an important role in the high viscosity of bitumen but also in the water-in-oil (W/O) emulsion stability. Nevertheless, their exact function in the stability mechanism of W/O emulsion still remains unresolved. It is...
-
Fall 2013
The high degree of variability of oil sands ores can be attributed to a mixture of different geological end members, i.e., estuarine sand, estuarine clay, marine sand and marine clay. This study focused on the mineralogy, especially of clay minerals, and toluene insoluble organic matter, referred...
-
Fall 2014
The formation of stable water-in-oil emulsions during bitumen extraction poses problems for water separation from diluted bitumen, which leads to equipment corrosion and catalyst fouling in downstream operations. Demulsifiers are used to break the stable emulsions and assist the separation of...
-
Oil Upgrading by Molecular Rearrangement and Cracking: A Study Using Model Compounds and Natural Chabazite
DownloadFall 2015
As demand for fuel increases, new technologies that can convert heavy oil and bitumen into light fuels are needed. Natural zeolites have been proven to catalyze reactions that decrease molecular weight, density, nitrogen, and metals content as well as vacuum residue content when mixed with raw...
-
Protecting Worker Safety in Alberta by Enhancing Hazard Identification and Control for Hazards Associated with Tailings Facilities, Dams, and Systems
DownloadSpring 2019
My research was motivated by a fatality that occurred at an oil sands tailings operation on January 19, 2014, when a worker drowned in an underground cavern which formed under a leaking tailings transport system. At the time of the incident, the organization and workers did not know that ground...
-
Colloid Science of Sand Remediation: A Study Motivated by the Non-Aqueous Extraction of Bitumen from Oil Sands
DownloadFall 2014
The current water-based method of bitumen extraction requires withdrawal of fresh water from the Athabasca River — a practice which leads to the continual buildup of tailings ponds and other environmental concerns. As Alberta’s bitumen production is expected to more than double by 2020, there is...
-
Spring 2014
Seven Ni-WC tubular wires utilized in this study were characterized by the nickel sheath area, powder composition, and overall initial carbide volume fraction of the wire prior to welding. The electrical resistivity of steel, stainless steel, and Ni-WC welding consumables were measured from...