Search
Skip to Search Results- 1Abdalrhman, Abdallatif S A
- 1Abdelrahman, Ali Satti Abdellatif
- 1Adesanwo, Toluwanise I J
- 1Afshar, Shima
- 1Brown, Lisa D
- 1Chen, Huanchen
- 2Amirfazli, Alidad (Mechanical Engineering)
- 1Amirfazli, Alidad
- 1Ania C. Ulrich (Civil and Environmental Engineering)/ Tong Yu (Civil and Environmental Engineering)
- 1Ania C. Ulrich (Department of Civil and Environmental Engineering)
- 1Babadagli, Tayfun (Civil and Environmental Engineering)
- 1Babadagli, Tayfun (Petroleum Engineering)
-
Effect of Temperature, Phase Change, and Chemical Additive on Interfacial Properties and Performance of Steam Applications
DownloadFall 2019
When considering the wettability state during steam applications, we find that most issues remain unanswered. Removal of polar groups from the rock surface with increasing temperature improves water wettability; however, other factors, including phase change, play a reverse role. In other words,...
-
Spring 2015
Previous studies on the extraction of liquid products from coals have focused mainly on increasing the yield, with very little emphasis on the quality of the liquid products. The main goal of this study is to achieve a balance between the yield and quality of the coal derived liquids. The first...
-
Fabrication and Characterization of Photolithographically Patterned Rough Surfaces Demonstrating Extreme Contact Angle Behavior
DownloadFall 2014
This thesis features experimental work done to fabricate and characterize silicon surfaces patterned using photolithographic techniques, both standard and novel, to produce a variety of surfaces with roughness of controlled geometric properties. In specific, one set of the surfaces fabricated...
-
Fall 2013
Solvent extraction of coal is a method to produce low molecular weight products from coal. It also can be used as a pretreatment for Direct Coal Liquefaction to enhance its efficiency. Yield, rate and nature of coal dissolution at low temperatures (25-150°C) and short contact time have been...
-
Fall 2015
Drop transfer from one solid surface to another through stretching liquid bridges between them is important for many industrial applications. Due to the different dominate forces, three possible regimes exist: Quasi-static Regime, where the transfer process is only dominated by surface forces;...
-
Fall 2014
Microalgae grow heterotrophically and produce high value pigments, nutraceuticals, pharmaceuticals, feeds, and biofuels. The growth rate, nutrient medium, growth density, and oil content strongly affect the economics of heterotrophic microalgae fermentation systems. This thesis explores the...
-
Spring 2012
Modelling of solvent extraction was studied using 1,2,3,4–tetrahydronaphtalene (tetralin) and Poplar coal (lignite). A kinetic model was developed taking into account temperature, mass transfer limitations and dominating events (physical or chemical) during coal liquefaction. It was found there...
-
Spring 2011
To ensure oil sands process water (OSPW) is suitable for discharge into the environment, advanced water treatment technologies are required. In this study, integrated ozonation-biodegradation was investigated as a potential treatment option for OSPW. The treatment efficiency was evaluated in...
-
Fall 2009
Albertan coal has been used to produce extracts as precursor for production of anode coke. Coal extractability was studied using digestion with Tetralin in a 500 ml reactor. Different operating conditions were tried and optimum conditions were chosen for runs with coal-derived solvents. Extracts...
-
Spring 2024
Steam-assisted gravity drainage (SAGD) has proved to be a technically and commercially successful methodology for recovering heavy-oil in Canada. At present, there are 22 commercial SAGD projects with over 300 pads and 2,700 well pairs, contributing to over 1.5 million bbl/day of production. The...