Search
Skip to Search Results- 1Amin, T M Fahim
- 1Amr Adel Balbola
- 1Boulet, Joel L
- 1Brausen, Henry A
- 1Bukhari, Syed Asad Manzoor
- 1EL Gowini, Mohamed MT
- 28Graduate and Postdoctoral Studies (GPS), Faculty of
- 28Graduate and Postdoctoral Studies (GPS), Faculty of/Theses and Dissertations
- 1Concordia University of Edmonton
- 1Concordia University of Edmonton/Independent Research Reports in Undergraduate Biology and Environmental Science (Concordia University of Edmonton)
- 1Mechanical Engineering, Department of
- 1Mechanical Engineering, Department of/Progress in Canadian Mechanical Engineering, Volume 5
-
Development of a MEMS 3D Stress Sensor Using Strain Engineering for Out of Plane Stress Applications
DownloadSpring 2020
This work aims to enhance the performance of a MEMS-based 3D piezoresistive sensor, which has the capability of extracting the six temperature-compensated stress components. That sensor is made of an n-type piezoresistive element that has low pressure/out-of-plane piezoresistive (PR) coefficient,...
-
Spring 2014
The development of rapid detection techniques to be applied at the point of use, has been gaining significant attention in the recent years. Rapid techniques are important and preferable methods in healthcare and environment sector due to the advantages they offer such as low-cost and reduced...
-
E.coli and bacteriophage T4: Using lytic bacteriophages to prevent tissue culture contamination
Download2014-07-04
Bacteria are commonly encountered cell culture contaminants. Due to the costly consequences of media contamination and the loss of research production, further research should be devoted to the prevention of contamination so time and money are not wasted. Phage have been demonstrated to prevent...
-
Spring 2013
Research was undertaken into the organic semiconductors tris(8- hydroxyquinoline)aluminum (Alq3) as well as bis(8-hydroxyquinoline)zinc (Znq2) to the effect of improving achievable morphological control using an inexpensive evaporation based solution synthesis method. By varying experimental...
-
Fall 2017
Capacitive micromachined ultrasound transducers (CMUTs) are a promising replacement technology for piezoelectric composite transducers, as they offer a more flexible architecture, wider signal bandwidth, and improved impedance matching between the sensor and the sensing medium. While CMUTs have...
-
Spring 2010
The procedure for milling micrometre scale cantilevers of lutetium iron garnet using a focused ion beam microscope was developed. The infrastructure to study these cantilevers using rotational hysteresis loops and ferromagnetic resonance experiments was set up. The cantilevers were shown to...
-
Spring 2013
An alternative method of manipulating fragile MEMS devices during fabrication has been developed. A specialized manual or robotic end effector utilizing a gecko inspired adhesive can replace the slow and costly manual tweezers used by the MEMS foundry Micralyne Inc. Improving the adhesive...
-
Spring 2016
Organic photovoltaics offer the tantalizing possibility of inexpensive renewable energy generation. However, there are many issues that need to be solved before organic photovoltaics can see widespread use. One main issues that needs to be resolved is the relatively low efficiency of organic...
-
Large-Scale Multi-Frequency Capacitive Micromachined Ultrasonic Transducer (CMUT) Arrays for Ultrasound Medical Imaging and Therapeutic Applications
DownloadSpring 2020
Ultrasonic transducers capable of operating over multiple frequency bands could have several interesting medical applications including multi-resolution multi-depth imaging for point-of-care ultrasound, imaging-therapy, super-harmonic contrast agent imaging, super-resolution imaging, image-guided...
-
Metallic thin films for NEMS/MEMS: from fundamental behaviour to microstructural design and fabrication
DownloadFall 2011
The main focus of this thesis is the study of thin metal films in microelectromechanical/nanoelectromechanical systems (MEMS/NEMS), ranging from application to fundamental behaviour. The use of metallic structural components is desirable since they are electrically conductive, optically reflective...