Search
Skip to Search Results- 7Finite-element-analysis
- 2Biomechanics
- 2FEA
- 1Behaviours
- 1Borehole Thermal Energy Storage (BTES)
- 1Buried Steel Pipeline
- 2El-Rich, Marwan (Civil and Environmental Engineering)
- 2Grondin, Gilbert (Civil and Environmental Engineering)
- 1Adeeb, Samer (Civil/Structural Engineering)
- 1Apel, Derek (Mining Engineering)
- 1Cheng, Roger (Civil & Environmental Eng.)
- 1Driver, Robert, G.(Civil and Environmental Enginnering)
-
Spring 2012
Direct shear tests were used to establish the shear behaviour of continuous planar-joints, discontinuous stepped-joints and discontinuous open-joints. The joints were cast in a Synthetic rock made of plaster, sand and water and tested under normal stresses that ranged from 50 kPa to 3.5 MPa. A...
-
FINITE ELEMENT CHARACTERIZATION OF THE BEHAVIOUR OF MASONRY INFILL SHEAR WALLS WITH AND WITHOUT OPENINGS
DownloadFall 2014
The current design practice is to ignore the interaction between masonry infill walls and containing frames due to the inadequate and incomplete guidance in current codes and standards. Most investigations on the behaviour of masonry infill shear walls were performed on scaled specimens and...
-
Fall 2017
A recent application of borehole thermal energy storage (BTES) technology to residential properties in Canada shows a significant reduction in the use of natural gas thereby saving energy consumption and reducing the generation of greenhouse gases. However, due to the construction principles of...
-
Spring 2015
The current design provisions (2006 edition of CSA-S6) for horizontally curved steel I-girders in the Canadian Highway Bridge Design Code are based on research conducted prior to the mid 1980's. Much research, experimental and numerical analysis, on horizontally curved girders has been conducted...
-
Fall 2010
Because of their high strength to weight ratio, stiffened steel plates are often used in light structures where plates are placed into compression. The stability of steel plates stiffened with longitudinal tee-shaped stiffeners and subjected to uniaxial compression or combined axial compression...
-
Fall 2013
There are many design methodologies and philosophies intended to provide structural integrity or increase structural robustness, thereby making structures resistant to progressive collapse. However, there is little information that reveals sources and levels of inherent robustness in structural...
-
Spring 2017
Buried steel pipelines are widely used in transportation and distribution of oil/gas products over long distance. The changing geo-environmental conditions over the line may subject the pipelines to unforeseen load combinations and prompt the failure and loss of containment of the pipelines that...
-
Spring 2013
Sit-to-stand (STS) transfer is a prerequisite for many daily tasks. Literature often assumes symmetrical behavior across the body (bilateral symmetry) during healthy STS. However; little research has been conducted to validate this assumption. Motion analysis was utilized to evaluate STS in 10...
-
Fall 2016
Talar collapse results in incongruity of the ankle joint, resulting in pain, stiffness, and disability. In the past, standard treatment has been surgical fusion or total ankle arthroplasty. These treatments can result in a loss of motion and function of the foot, as well as pseudarthrosis. A...