Search
Skip to Search Results- 1Afshar, Shima
- 1Ahmed, Nirob
- 1Amundarain, Jesus
- 1Ansari, Nesma Nasir
- 1Arora, Nitin
- 1Berahman, Behnam
- 49Department of Chemical and Materials Engineering
- 7Department of Civil and Environmental Engineering
- 7Department of Mechanical Engineering
- 2Department of Chemistry
- 1Department of Biochemistry
- 1Department of Physics
- 6Xu, Zhenghe (Chemical and Materials Engineering)
- 3Gupta, Rajender (Chemical and Materials Engineering)
- 3Liu, Qingxia (Chemical and Materials Engineering)
- 3Zeng, Hongbo (Chemical and Materials Engineering)
- 2Amirfazli, Alidad (Mechanical Engineering)
- 2Babadagli, Tayfun (Civil and Environmental Engineering)
-
Fall 2020
Asphalt pavements are the most common type of pavements in North America. Increasing traffic demand, harsh weather conditions, and the tendency for infrastructure operators to reduce the cost (and, therefore, the frequency) of maintenance are the major reasons for asphalt performance improvement...
-
Spring 2013
The self-association properties of two model compounds of asphaltene, 2,6-bis[2-(pyren-1-yl)ethyl]pyridine (PyPPy, C41H29N) and 2,6-bis[2-(phenanthren-9-yl)ethyl]pyridine (PhPPh, C37H29N), were studied in deuterated chloroform and deuterated methylene chloride. 1H NMR spectroscopy titration...
-
Fall 2015
Oil sands found in Athabasca and Cold Lake regions of Northern Alberta form Canada’s primary source of energy reserves. Asphaltenes, a significant part of bitumen is often considered to be the least valuable component of crude oil due to various factors such as difficulty in transporting and...
-
Spring 2016
During the extraction of crude oil or bitumen, stable water-in-oil emulsions are inevitably formed. The emulsified water contains chloride ions and other organic acidic compounds that cause severe corrosion problems to the downstream plant equipment, creating operational and safety issues and...
-
Spring 2015
The minable oil sands extraction process can be understood on a scale of a single oil sand grain. When the oil sand ore is mixed with warm water, each sand granule is initially covered with bitumen film which ruptures under the composite effect of shear and interfacial forces, while water...
-
Characterization of asphaltene molecular structures by cracking under hydrogenation conditions and prediction of the viscosity reduction from visbreaking of heavy oils
DownloadSpring 2013
The chemical building blocks that comprise petroleum asphaltenes were determined by cracking samples under conditions that minimized alterations to aromatic and cycloalkyl groups. Hydrogenation conditions that used tetralin as hydrogen-donor solvent, with an iron-based catalyst, allowed...
-
Characterization of Athabasca asphaltenes separated physically and chemically using small-angle X-ray scattering
DownloadFall 2010
Athabasca asphaltenes were characterized using small-angle X-ray scattering (SAXS) with synchrotron radiation. Two methods were used to separate asphaltenes from Athabasca bitumen. Conventional chemical separation by precipitation with n-pentane, and physical separation realized by passing...
-
Fall 2009
In this study, we describe the use of different silica materials to separate vanadium compounds from Asphaltenes. We used high performance flash chromatography separation method to separate asphaltenes at different solvent strengths on sea sand. The separation conditions were optimized for flow...
-
Spring 2015
Colloidal-collector interactions are of fundamental importance in separation and filtration technologies. Here, the effect of collector grains on the behavior of colloidal particles was studied in two different experimental systems, i.e., column studies with stationary collectors and batch mixing...
-
Colloid Science of Sand Remediation: A Study Motivated by the Non-Aqueous Extraction of Bitumen from Oil Sands
DownloadFall 2014
The current water-based method of bitumen extraction requires withdrawal of fresh water from the Athabasca River — a practice which leads to the continual buildup of tailings ponds and other environmental concerns. As Alberta’s bitumen production is expected to more than double by 2020, there is...