Search
Skip to Search Results- 1Afshar, Shima
- 1Baessa, Muaadh Ali
- 1Bobicki, Erin R.
- 1Chen, Huanchen
- 1Chini, Seyed Farshid
- 1Dion, Moïse
-
Effect of Cellulose Nanocrystal Particles on Rheology, Transport and Mechanical Properties of Oil Well Cement Systems
DownloadSpring 2018
The increase in oil consumption during the past few decades, coupled with oil/gas extraction from shale in the recent years has increased drilling and cementing demands. Well cementing operation is one of the most crucial and important steps in any well completion. However, since it takes place...
-
Spring 2016
Thickened tailings technology is implemented in some oil sands operations in order to recycle warm process water, thereby reducing net water draw, and to reduce the size of tailings impoundment areas. The rheology of thickened tailings is complex and time-dependent, and the underlying mechanism...
-
Effect of Temperature, Phase Change, and Chemical Additive on Interfacial Properties and Performance of Steam Applications
DownloadFall 2019
When considering the wettability state during steam applications, we find that most issues remain unanswered. Removal of polar groups from the rock surface with increasing temperature improves water wettability; however, other factors, including phase change, play a reverse role. In other words,...
-
Experimental Study on Effect of hydrophobicity on Polymer Conformations, Rheology and Flow in Porous Media
DownloadFall 2023
Typically, polymer screening for enhanced oil recovery operations is done based on viscosity, viscosity dependent molecular weight correlations, and concentration. However, direct measurement of molecular weight and Molecular Weight Distribution (MWD) along with the other conformational...
-
Fabrication and Characterization of Photolithographically Patterned Rough Surfaces Demonstrating Extreme Contact Angle Behavior
DownloadFall 2014
This thesis features experimental work done to fabricate and characterize silicon surfaces patterned using photolithographic techniques, both standard and novel, to produce a variety of surfaces with roughness of controlled geometric properties. In specific, one set of the surfaces fabricated...
-
Fall 2009
A common challenge during deposition of slurries is segregation as large particles settle through the matrix of fines and water. Whether segregation occurs or not depends on the grain size distribution of the solids, the void ratio or solids content and the rheological properties of the...
-
High-Float Emulsion Residue: A New Rheological Model Based on the Existence of a Yield Stress
DownloadFall 2016
“High-float” (HF) emulsions are dispersions of micron-sized bitumen droplets in water, with a special type of anionic surfactant functioning as stabilizer. By allowing the water to evaporate from an HF emulsion, what remains is called a “high-float emulsion residue.” Although indistinguishable in...
-
Hydrothermal Treatment of Low Rank Coal for Making High Solid Loading and Stable Coal Water Slurries
DownloadFall 2014
The objective of this research is to understand the effect of hydrothermal dewatering (HTD) on surface properties, stability and rheological behavior of lignite water slurry (LWS). The surface forces between coal particles are found to be attractive after HTD, which is proven by contact angle and...
-
Fall 2015
The rheological properties of heavy oil and bitumen depend on factors such as temperature, pressure, diluent type and diluent composition, as well as sample shear and thermal histories and shear conditions during measurements. Each of these factors can affect the value of apparent viscosity...
-
Impact of Suspended Cuttings on Drilling Fluid Rheology and Hole Cleaning Capacity in Horizontal Directional Drilling
DownloadFall 2020
Trenchless technologies are a family of techniques to install or rehabilitate conduits under the ground without conventional open excavation processes. Among them, horizontal directional drilling (HDD) is one of the most popular methods for installation of pipelines under surface obstacles, due...