Search
Skip to Search Results- 1Ball, Bruce Evart.
- 1Boutros,Jenny
- 1Deshmukh, Rajeev Dattatraya.
- 1Dewar, Matthew P
- 1Dini, Yoann
- 1Dong, Shimiao
- 7Department of Civil and Environmental Engineering
- 5Department of Chemical and Materials Engineering
- 4Department of Chemistry
- 3Department of Mechanical Engineering
- 2Department of Chemical Engineering
- 1Department of Biological Sciences
- 3Dr. Mohamed Gamal El-Din (Civil and Environmental Engineering)
- 2Dr. Yang Liu (Civil and Environmental Engineering)
- 2Harynuk, James (Chemistry)
- 2Nobes, David (Mechanical Engineering)
- 1Belosevic, Miodrag (Biological Sciences)
- 1Chung, Hyun-Joong (Department of Chemical and Materials Engineering)
-
Fall 2021
Middleton, Steven Mark William
A numerical model and software interface for the design and modelling of Stirling engines was presented. This model was developed to suit low-temperature Stirling engines, those that run at source temperature of less than 150 °C and run at speeds where temporarily developed losses become...
-
Application of Anoxic-Aerobic Membrane Bioreactors (MBRs) for Oil Sands Process-Affected Water (OSPW) Treatment
DownloadFall 2016
The enormous volumes of oil sands process-affected water (OSPW) produced during oil sands bitumen extraction have been a public concern due to the toxicity and persistence of the organic contaminants contained in the water. Among all the contaminants in OSPW, naphthenic acids (NAs) are regarded...
-
Application of Ozone and Peroxone Processes for Naphthenic Acids Degradation in Oil Sands Process-Affected Water: Characterization of Water Before and After Treatment
DownloadFall 2017
Appling ozone (O3) with high doses (>100 mg/L) to remove naphthenic acids (NAs) from oil sands process-affected water (OSPW); limits its application and feasibility in the OSPW remediation. To decrease the required doses and their associated costs, this study examined the application of ozone...
-
Breaking with tradition: Fischer—Tropsch gas loops and modelling vapor—liquid—liquid equilibrium
DownloadFall 2015
Fischer—Tropsch gas loops have been in use for nearly a century, producing synthetic fuels and petrochemicals. Yet there still remain many opportunities to expand its uses, update the gas loop with new technology, as well as better understand at a fundamental level the way the products behave....
-
Spring 2013
20Cr-32Ni-1Nb stainless steel alloys are commonly used in hydrogen reformer manifolds for transporting hot hydrogen by-products at 750-950 celcius. After long periods of exposure, embrittling secondary carbides and intermetallic phases can precipitate at the grain boundaries which can drastically...
-
Developing High Precision Heat Capacity Correlations for Organic Solids and Liquids - Extending to Biofuels and Sugars
DownloadSpring 2018
There is a great need for easily accessible and accurate physical property data in the heavy oil industry, the pharmaceutical industry, and other heavy molecule guided productions. In recent years, high precision predictive correlations for isobaric heat capacities of heavy and ill-defined...
-
Development and application of Fenton and UV-Fenton processes at natural pH using chelating agents for the treatment of oil sands process-affected water
DownloadFall 2016
The increasing amount of oil sands process-affected water (OSPW), its high toxicity towards aquatic organisms due to naphthenic acids (NAs) and other organics, and the zero discharge practice of the oil sands industry urge researchers to seek effective approaches for its treatment. Advanced...
-
Effect of Heat Exchanger Volume and Geometry on Power Output of a Low Temperature Difference Stirling Engine
DownloadFall 2022
This work presents the results of an investigation into heat exchanger design for low temperature difference Stirling engines (LTDSEs). The aim of this study was to determine if there is an optimum heat exchanger geometry for producing maximum power output for a LTDSE. There are multiple factors...
-
Spring 2010
New methods to fabricate nanometer sized structures will be a major driving force in transforming nanoscience to nanotechnology. There are numerous examples of the incorporation of nanoscale structures or materials enhancing the functionality of a device. Graphitic carbon is a widely used...