Search
Skip to Search Results- 1Anas Khalil Sidahmed
- 1Athar, Khan S
- 1Chen, Yijun
- 1Coimbra Paniagua, Luis Eduardo
- 1Cossey, Heidi
- 1Huang, Chunkai
- 2Guigard, Selma (Department of Civil and Environmental Engineering)
- 2Yu, Tong (Civil and Environmental Engineering)
- 1Babadagli, Tayfun (Civil & Environmental Engineering)
- 1Babadagli, Tayfun (Civil Engineering)
- 1Bayat, Alireza (Civil Engineering)
- 1Dehghanpour, Hassan (Petroleum Engineering)
-
Spring 2016
The study of methanogenesis in wastewater biofilms and various aggregated methanogenic environmental samples with high spatial resolution can be achieved by using microbiosensor techniques. In this study, the fabrication of a microbiosensor for methane detection was studied. This microbiosensor...
-
A Multi-Objective Optimization Workflow for Steam-Alternating-Solvent Heavy Oil Recovery Process Design
DownloadSpring 2020
Coimbra Paniagua, Luis Eduardo
The steam alternating solvent (SAS) process involves multiple cycles of steam and solvent (e.g. propane) being injected into a horizontal well pair to produce the heavy oil. Companies are interested in these solvent-based methods, as they entail a smaller environmental footprint with reduced...
-
Fall 2021
The warm vaporized solvent injection process has been proposed as a more environmentally friendly alternative to steam-based technologies for bitumen recovery. The process typically involves injecting heated solvent vapor into a horizontal injector; the solvent condenses and dissolves into...
-
Fall 2014
The extraction of bitumen from oil sands in Alberta, Canada, leads to the creation of tailings that are contained in lake-sized ponds under zero discharge policy. Stratification of tailings over time leads to the formation of mature fine tailings (MFT), an oil based emulsion containing residual...
-
Determination of biokinetic parameters of wastewater biofilms from oxygen concentration profiles
DownloadFall 2011
The process of scale-up and rational optimization of biofilm processes for effective wastewater treatment and reuse require better understanding of the biokinetic behavior of microorganisms in the biofilms. At present, no fast and accurate methods exist for determining kinetic parameters for...
-
Fall 2011
Microelectrodes can be used for profiling environmental biofilms. Currently there is no sulfate microelectrode available for studying sulfate reduction in biofilms. In this study, a sulfate microelectrode was fabricated and tested in measurement of environmental biofilms for the first time. The...
-
Development of Solvent Selection Criteria Based on Diffusion Rate, Mixing Quality, and Solvent Retrieval for Optimal Heavy-Oil and Bitumen Recovery at Different Temperatures
DownloadFall 2015
Heavy-oil and bitumen recovery requires high recovery factors to offset the extreme high cost of the process. Attention has been given to solvent injection for this purpose and it has been observed that high recoveries are achievable when combined with steam injection. Heavier (“liquid”) solvents...
-
Fall 2020
Concerns over the environmental impacts of thermal production methods for bitumen and heavy oil have led to the exploration of alternative technologies including solvent-assisted production methods. While solvent-assisted production methods have been studied extensively, apparent diffusion rates...
-
Estimating Diffusion Coefficients And Visualizing Interactions In Propane-Heavy Oil Systems
DownloadSpring 2019
Unconventional oil (mainly heavy oil, extra heavy oil and bitumen) represents a significant share of global oil reserves. Due to their high viscosity, efficient recovery of oil from these reserves is challenging and remains an issue of ongoing global research. Thermal recovery methods are...
-
Spring 2011
Extraction of hydrocarbons from an Athabasca oil sand slurry were conducted using supercritical carbon dioxide (SC-CO2). The oil sand was slurried to a 1:1 ratio with water and experiments were conducted using a laboratory-scale batch supercritical fluid extraction (SFE) system. Preliminary tests...