Search
Skip to Search Results- 2Guigard, Selma (Department of Civil and Environmental Engineering)
- 1Babadagli, Tayfun (Civil & Environmental Engineering)
- 1Babadagli, Tayfun (Civil Engineering)
- 1Bayat, Alireza (Civil Engineering)
- 1Dr. Selma E. Guigard (Department of Civil and Environmental Engineering)
- 1Hashemian, Leila (Civil Engineering)
-
Fall 2014
The extraction of bitumen from oil sands in Alberta, Canada, leads to the creation of tailings that are contained in lake-sized ponds under zero discharge policy. Stratification of tailings over time leads to the formation of mature fine tailings (MFT), an oil based emulsion containing residual...
-
Development of Solvent Selection Criteria Based on Diffusion Rate, Mixing Quality, and Solvent Retrieval for Optimal Heavy-Oil and Bitumen Recovery at Different Temperatures
DownloadFall 2015
Heavy-oil and bitumen recovery requires high recovery factors to offset the extreme high cost of the process. Attention has been given to solvent injection for this purpose and it has been observed that high recoveries are achievable when combined with steam injection. Heavier (“liquid”) solvents...
-
Fall 2020
Concerns over the environmental impacts of thermal production methods for bitumen and heavy oil have led to the exploration of alternative technologies including solvent-assisted production methods. While solvent-assisted production methods have been studied extensively, apparent diffusion rates...
-
Spring 2011
Extraction of hydrocarbons from an Athabasca oil sand slurry were conducted using supercritical carbon dioxide (SC-CO2). The oil sand was slurried to a 1:1 ratio with water and experiments were conducted using a laboratory-scale batch supercritical fluid extraction (SFE) system. Preliminary tests...
-
Extraction of Hydrocarbons from Bitumen and Bitumen-containing Process and Process Waste Streams using Supercritical Carbon Dioxide
DownloadSpring 2019
Extractions of hydrocarbons from bitumen and bitumen-containing process and process waste streams generated from surface mined oil sands were conducted using supercritical carbon dioxide (SC-CO2). Dynamic extractions were performed on a bench-scale batch supercritical fluid extraction (SFE)...
-
Fall 2010
This study investigates the extraction of hydrocarbons from oil sand using supercritical carbon dioxide (SC CO2). Experiments were carried out on three different types of oil sands. After some preliminary experiments, the feasibility of extracting hydrocarbons from oil sands by SC CO2 was...
-
Heavy Oil/Bitumen Recovery by Alternate Injection of Steam and Solvent (Hydrocarbon and CO2) in Fractured Carbonates and Oilsands
DownloadFall 2013
The world energy demand is constantly increasing and fossil fuels are still by far the main energy resource that supplies the world energy consumption market, therefore increasing oil recovery from all types of reservoirs is an important matter. The burning of fossil fuels for energy purposes, on...
-
Spring 2019
The oil sands industry in Alberta, Canada has been thriving for over five decades, and this multi-million-year-old resource has fueled rapid economic growth in Alberta. However, the oil sands industry has left behind tons of oil sands tailings and oil sands process-affected water (OSPW), and the...
-
Investigation of Pavement Management Practices and Pavement Material Performance in Alberta, Canada
DownloadFall 2018
Roadways are one of the most important pieces of public infrastructure in any municipality, province, or country. Roads connect economic corridors encouraging trade, provide citizens with the option to travel, and remain a necessity for all people to access work and the majority of the main...
-
Optimization of Outflow Control Devices Design in Steam-Assisted Gravity Drainage Models with Wellbore Trajectory Excursions
DownloadFall 2018
Canada has giant oil reserves which ranks third worldwide with proven oil reserves of 171 billion barrels. Alberta alone contributes with 165.4 billion barrels found in oil sands. However, those oil sands are extremely viscous and only 10% are recoverable by means of open-pit mining. In-situ...