Search
Skip to Search Results- 1Afshar, Shima
- 1Amani, Mohammad Javad
- 1Bu, Weida
- 1Christopher, Street
- 1Dini, Yoann
- 1Dos Santos De Araujo, Filipe
-
Fall 2009
The extraction of bitumen (heavy oil) from the oil sands is predominantly achieved through a water-based technology. This involves a slurrying process, typically called conditioning, which is categorized into three equally important steps: bitumen-sand liberation, bitumen coalescence, and...
-
Spring 2017
The formation of stable water-in-oil emulsions during oil sands extraction process causes a number of operational issues, such as equipment corrosion, storage and transportation problems. One common method for emulsion breakup in industry is to use chemical demulsifiers. The chemical demulsifiers...
-
High-Float Emulsion Residue: A New Rheological Model Based on the Existence of a Yield Stress
DownloadFall 2016
“High-float” (HF) emulsions are dispersions of micron-sized bitumen droplets in water, with a special type of anionic surfactant functioning as stabilizer. By allowing the water to evaporate from an HF emulsion, what remains is called a “high-float emulsion residue.” Although indistinguishable in...
-
Fall 2015
The rheological properties of heavy oil and bitumen depend on factors such as temperature, pressure, diluent type and diluent composition, as well as sample shear and thermal histories and shear conditions during measurements. Each of these factors can affect the value of apparent viscosity...
-
Fall 2013
In industrial visbreaking processes, the conversion typically takes place at ~450 °C and the extent of conversion is limited by the coking propensity of the feed. Some of the older literature on bitumen upgrading reported that it was possible to substantially upgrade the straight run product at...
-
Spring 2010
The demand for accurate bitumen-pentane mass transfer data was the main motivation behind this research. Difficulties such as complex phase behavior, high viscosity and opacity of the hydrocarbon invariably lead to failure of conventional techniques to measure mass transfer coefficients...
-
Metal particle catalyst formation from thin films for the creation of vertically aligned carbon nanotube structures
DownloadFall 2011
This work contains research associated with the metal catalysts used in the formation of vertically aligned carbon nanotube (VACNT) films through catalytic chemical vapour deposition (CCVD). The solid-state dewetting process of thin metal films is studied using Ni. In the dewetting process, grain...
-
Microwave Heating Of Non-Aqueous Oil Sands Extraction Gangue: Study Of Optimal Cyclohexane-Water Mass Ratio And Solvent Recovery Rate
DownloadFall 2023
Non-aqueous bitumen extraction processes (NAE) of mined oil sands ore have been investigated to circumvent the environmental and operating limitations of the current hot water-based technology. However, one primary challenge of NAE is a solvent recovery that meets environmental and economic...
-
Natural Zeolite Catalysts for the Integrated Cracking, Waterless Extraction and Upgrading of Oilsands Bitumen
DownloadSpring 2012
Canadian oilsands bitumen represents one of the largest petroleum reserves in the world, but extraction of that resource raises significant environmental, operational and quality-related challenges. Current extraction processes are water intensive, generating high volume tailings ponds that are...