Search

2017-11-01

Khodaie, N., Ivey, D.G., Henein, H.

Dilatometry is the most accurate and common method for measuring the kinetics of phase transformations in solid specimens. Despite the development of a more accurate technique, an inferior method, i.e., the lever rule, is widely used in the scientific community to interpret raw dilatometry data....

2016-01-01

Delshad Khatibi, P., Phillion, A.B., Henein, H.

The effect of isochronal annealing on D2 tool steel powder, rapidly solidified via both Impulse Atomization and Water Atomization, has been evaluated using high-resolution scanning electron microscopy and Vickers microhardness. The amount of supersaturation of the alloying elements inside the...

2023-09-01

Ye, Haoran, Shi, Yang, Xu, Ben Bin, Guo, Zhanhu, Fan, Wei, Zhang, Zhongfeng, Mulvihill, Daniel M., Zhang, Xuehua, Shi, Pengju, He, Ximin, Ge, Shengbo

In light of the uprising global development on sustainability, an innovative and environmental friendly wood-based material derived from natural pinewood has been developed as a high-performance alternative to petrochemical-based materials. The wood-based functional material, named as BC-CaCl2,...

2017-01-01

Bogno, A.-A., Henein, H., Gallerneault, M.

Addition of Sc to Al-Cu is reported to be responsible for a high precipitation hardening upon heat treatment and serves as a good grain refiner. However, Scandium is presently very expensive, therefore, getting maximum benefit from a minimum addition would be economically of value. This work...

2015

Morin, Marie-Eve

2016-01-01

Tan, Huanshu, Diddens, Christian, Ly, Pengyu, Lohse, Detlef

Evaporating liquid droplets are omnipresent in nature and technology, such as in inkjet printing, coating, deposition of materials, medical diagnostics, agriculture, the food industry, cosmetics, or spills of liquids. Whereas the evaporation of pure liquids, liquids with dispersed particles, or...

2017-01-01

Spinelli, J.E., Bogno, A.-A., Henein, H.

Hypereutectic Al-18wt.%Si alloy is widely used in automotive industry as a wear resistant alloy for engine components. However, in the last few years, this traditional composition is being considered for processing by different rapid solidification methods. Positive points include its low thermal...

2010

Law, G. K., Elliott, J. A., Forbes, J. F., Weiss, A. D., McGann, L. E., Jomha, N. M.

Large articular cartilage defects have proven difficult to treat and often result in osteoarthritis of the affected joint. Cryopreservation of articular cartilage can provide an increased supply of tissues for osteochondral allograft but cryoprotective agents are required; however, few studies...

2018-01-01

Valloton, J., Bogno, A.-A., Henein, H., Herlach, D.M., Sediako, D.

This paper reports on the undercooling and growth morphology of Al-4.5wt%Cu and Al-4.5wt%Cu-0.4wt%Sc with a focus on the effect of Sc addition. It is found that the addition of Sc reduces the undercoolings of both primary phase and eutectic. In addition, the morphology of the Al-4.5wt%Cu-0.4wt%Sc...

2018-01-01

Wiskel, J.B., Ma, J., Ivey, D.G., Henein, H.

Transverse tensile samples were extracted from the centreline position of three different compositions of uncoated thick walled microalloyed X70 UOE pipe at a location 180° from the weld. Aging heat treatments of 5, 15, and 25 minutes and temperatures of 175, 215, and 255°C were applied. Tensile...