Search
Skip to Search Results- 1Abdalrhman, Abdallatif S A
- 1Abdelrahman, Ali Satti Abdellatif
- 1Adesanwo, Toluwanise I J
- 1Afshar, Shima
- 1Aghaie, Ermia
- 1Baker, Kathleen E.N.
- 21Department of Civil and Environmental Engineering
- 16Department of Chemical and Materials Engineering
- 5Department of Renewable Resources
- 3Department of Earth and Atmospheric Sciences
- 2Department of Mechanical Engineering
- 1Chemical and Materials Engineering
- 2Ulrich, Ania (Department of Civil and Environmental Engineering)
- 2Zeng, Hongbo (Chemical and Materials Engineering)
- 1Ania C. Ulrich (Civil and Environmental Engineering)/ Tong Yu (Civil and Environmental Engineering)
- 1Ania C. Ulrich (Department of Civil and Environmental Engineering)
- 1Askari-Nasab, Hooman (Civil and Environmental Engineering)
- 1Beier,Nicholas
-
Fall 2011
One of the major issues in the current oil sands waste management techniques is a lack of a direct linkage between the long-term mine plans and the quantity of the tailings produced downstream. This research is focused on developing a linkage between oil sands long-term mine plans and the final...
-
Life Cycle Assessment of Transportation Fuels from Canada’s Oil Sands through Development of Theoretical Engineering Models
DownloadFall 2014
Oil sands in Canada are significant in fulfilling the current and the future energy demands of North America. The development of these resources, besides the increased awareness in global carbon management, has given way to various policy regulations such as the Low Carbon Fuel Standard (LCFS)...
-
Fall 2013
Solvent extraction of coal is a method to produce low molecular weight products from coal. It also can be used as a pretreatment for Direct Coal Liquefaction to enhance its efficiency. Yield, rate and nature of coal dissolution at low temperatures (25-150°C) and short contact time have been...
-
Influence of Amendments and Soil Depth on Available Nutrients and Microbial Dynamics in Contrasting Topsoil Materials Used for Oil Sands Reclamation
DownloadFall 2015
As of December 2013, the cumulative area disturbed by oil sands mining in NE Alberta was 896 km2 out of an estimated final footprint of 4,800 km2 – all of which will require reclamation. Expensive handling costs and scarce soil resources necessitate judicious management and application of...
-
Fall 2013
This thesis is a multi-modal exploration of the photographer-researcher as a methodological opportunity to gain multiple, collaborative and collective perspectives on living in relation to the Alberta oil sands zone of North America. Using participatory-photography with youth, this thesis is one...
-
Spring 2015
Previous studies on the extraction of liquid products from coals have focused mainly on increasing the yield, with very little emphasis on the quality of the liquid products. The main goal of this study is to achieve a balance between the yield and quality of the coal derived liquids. The first...
-
Spring 2020
Albertan oil sands ores are becoming more difficult to process efficiently as the clay content of the ore increases and the grade of the ore worsens. A key to improving the extraction of bitumen from low-grade oil sands, thereby increasing the longevity of this critical resource, is reducing the...
-
Spring 2014
This thesis documents the research undertaken to develop and assess modeling and monitoring tools to improve the water quality management in the Athabasca River, Alberta. The Upper Athabasca River (UAR) has experienced dissolved oxygen (DO) sags, which may affect the aquatic ecosystem. A water...
-
Spring 2019
This thesis aims to demonstrate the feasibility of using System Dynamics (SD) techniques to develop a transparent, open-source and reproducible model capable of simulating long-term soil water dynamics in a tailings-cap system subject to upward flux from a consolidating tailings substrate. The...
-
Spring 2014
Seven Ni-WC tubular wires utilized in this study were characterized by the nickel sheath area, powder composition, and overall initial carbide volume fraction of the wire prior to welding. The electrical resistivity of steel, stainless steel, and Ni-WC welding consumables were measured from...