Search
Skip to Search Results- 1Amirian, Benhour
- 1Caldera Palacios, Anuar Alfonso
- 1Fenske, Cameron
- 1Jiacong Li
- 1Jonsson, Katherine M.
- 1Khademi, Fatemeh
- 2Henein, Hani (Chemical and Materials Engineering)
- 1Bindiganavile, Vivek (Civil and Environmental Engineering)
- 1Buriak, Jillian (Chemistry)
- 1Chen, Yuxiang (Civil and Environmental Engineering)
- 1Chen, Zengtao (Mechanical Engineering Department)
- 1Deng, Lijun (Civil and Environmental Engineering)
-
A Novel 3D Printed Brace Manufacturing Process for the Treatment of Adolescent Idiopathic Scoliosis
DownloadSpring 2019
Adolescent Idiopathic Scoliosis (AIS) is a three-dimensional spinal deformity with lateral curvature and axial vertebral rotation affecting 1-3% of adolescents. Bracing is a proven non-surgical treatment aiming to stop curve progression. Literature has shown that brace wear time affects brace...
-
Additive Manufacturing of Shape Memory Polymers: Effects of Print Orientation and Infill Percentage on Mechanical and Shape Memory Recovery Properties
DownloadFall 2017
Material Extrusion Additive Manufacturing (MEAM), also known as Fused Deposition Modeling (FDM), is a manufacturing technique in which three-dimensional objects are built. These objects are built by repeatedly extruding thin layers of molten materials through a nozzle in different paths and...
-
Spring 2016
Polypropylene (PP) is a thermoplastic polymer and is one of the most widely used polyolefin polymer, which is a well-known semi crystalline polymer. Plastics such as polypropylene are commonly used for different applications and purposes due to their versatility; however, it should be noted that...
-
Fall 2019
Cutting the pavement to install a small diameter utility network, such as flexible pipes, conduits or telecommunication lines, is a common practice in urban areas. The last 200 meters of installation is known particularly difficult to deliver, with obstacles both above and below ground to...
-
Spring 2024
The escalating energy consumption of buildings highlights the significance of adopting energy-efficient building design and construction practices. The growing demand for higher thermal resistance within building envelopes also necessitates innovative solutions for energy-efficient building...
-
Fall 2016
Strain aging of microalloyed steel pipes, manufactured for oil and gas transmission, can occur during the anti-corrosion fusion bonded epoxy coating process (180°C - 250°C) and/or during long term storage or use. The primary mechanism of strain aging involves the segregation of interstitial...
-
Macro-Scale Lithium-Ion Battery Simulation by Means of the Finite Element Method and Concentrated Solution Theory
DownloadFall 2023
Lithium-ion batteries are the leading contender for high density energy storage for applications such as electric vehicles and personal electronic devices. While they promise well over 4 V of potential per cell, actually realizing such high voltages is quite difficult, given the many modes of...
-
Fall 2017
Cementitious binders have been widely used to improve the mechanical, hydraulic, and physical properties of soft soils by deep soil mixing and jet grouting in the past 50 years. However, the majority of previous investigations are limited to the stabilization of very soft clays in marine...
-
Spring 2013
This thesis presents work performed to improve the work hardening behaviour of an X80 microalloyed steel through various Interrupted Thermal Treatments (ITT). The aim of this work was to determine the relationships between thermal history, microstructure and mechanical properties through both...
-
Spring 2013
There are growing demands for energy throughout the world. In order to meet the rising energy pressures of the future, renewable sources are required. One approach to resolve this problem is organic photovoltaics (OPVs), which offers a potential low-cost energy solution for the future. Before...