Search
Skip to Search Results- 1Alireza Nouri
- 1ArianVelayati
- 1Baldygin, Aleksey
- 1Bhargava, Aakanksha
- 1Brown, Daniel M.
- 1Chen, Liang
- 21Graduate and Postdoctoral Studies (GPS), Faculty of
- 21Graduate and Postdoctoral Studies (GPS), Faculty of/Theses and Dissertations
- 1ERA General Collection
- 1ERA General Collection/Supplementary Thesis Materials (ERA General)
- 1Civil and Environmental Engineering, Department of
- 1Civil and Environmental Engineering, Department of/Research Materials (Civil & Environmental Engineering)
-
Spring 2024
A diffuse interface model to simulate a system of two immiscible liquids with surfactants is proposed. This model is based on a modified Ginzburg-Landau free energy functional to account for non-ionic soluble surfactants and couples the Navier-Stokes equations with two Cahn-Hilliard equations...
-
High-Float Emulsion Residue: A New Rheological Model Based on the Existence of a Yield Stress
DownloadFall 2016
“High-float” (HF) emulsions are dispersions of micron-sized bitumen droplets in water, with a special type of anionic surfactant functioning as stabilizer. By allowing the water to evaporate from an HF emulsion, what remains is called a “high-float emulsion residue.” Although indistinguishable in...
-
Spring 2013
Egg yolk contains approximately 10% (w/w) phospholipids (PL), of which about 70% is phosphatidylcholine (PC). Conventional methods of PL extraction from egg yolk involve using hazardous organic solvents. Supercritical carbon dioxide (SC-CO2), as a "green" solvent, had been applied for the...
-
Fall 2016
Asphaltenes are the heaviest component in crude oil and bitumen. The molecular interactions and interfacial behaviours of asphaltenes are closely related to many challenging issues in oil production, which are believed to play an important role in stabilizing water-in-oil (W/O) and oil-in-water...
-
Spring 2015
Aiming to pursue studying enhanced oil recovery processes with an ex-situ produced emulsion as flooding agent, an improved core flooding experimental system was designed, constructed and commissioned. The developed system allows the use of not only emulsion, but also other flooding agents,...
-
Organically-Modified Clay Minerals in Oil Sands: Characterization and Effect of Hydrothermal Treatment
DownloadFall 2017
The intimate association between bitumen components and clay minerals is an important feature of oil sands fine solids. These organically-modified clay minerals cause serious problems in Canadian oil sands production: hindering bitumen extraction, stabilizing water-in-bitumen emulsions, fouling...
-
Possible thunderstorm modifications caused by the Athabasca oil sands development and the Canadian Shield
DownloadFall 2017
Thunderstorms are common in boreal forest regions and can cause dangerous hazards such as lightning, forest fires, hail, wind, and flooding. Significant research has been conducted to help predict thunderstorms to mitigate or avoid the hazards and damage. The development of thunderstorms...
-
Fall 2012
Recently, a commercially available biodegradable polymer, ethyl cellulose (EC) has been found to be effective in destabilizing water-in-diluted bitumen emulsions. In this study, the role of hydroxyl content and molecular weight of ECs and the effect of mixing and operating temperature in...
-
Spring 2010
There are several technical challenges in large scale heavy oil processing. In the oil sand industry, for example, the existence of water-in-oil emulsion in diluted bitumen produced from froth treatment presents a great challenge to the industry. In this work, the effect of different bitumen...
-
Studying Structure-Nanoaggregation Relations of Polyaromatic Molecules in the Bulk Oil Phase and at the Oil-Water Interface Using Molecular Dynamics Simulation
DownloadSpring 2014
The detection, identification and characterization of early stage molecular association of polyaromatic molecules into nanoaggregates, where these nanoaggregates represent the first level of molecular clusters or building blocks are critical in areas such as design and fabrication of advanced 3-D...