Search
Skip to Search Results- 1Aghaie, Ermia
- 1Ahmed, Ezz Q
- 1Arango Vasquez,Daniela
- 1Behnamian, Yashar
- 1Chen, Xueyuan
- 1Chevil, Karina
- 5Chen, Weixing (Chemical and Materials Engineering)
- 5Luo, Jingli (Chemical and Materials Engineering)
- 2Li, Dongyang (Chemical and Materials Engineering)
- 2Mitlin, David (Chemical and Materials Engineering)
- 2Thundat, Thomas (Chemical and Materials Engineering)
- 1Henein, Hani (Chemical and Materials Engineering)
-
Corrosivity and Thermal Stability of Biocrude Oil for Co-Processing in FCC Feedlines: An Investigation and Risk Assessment
DownloadSpring 2023
Fast pyrolysis bio-oil is a promising renewable energy source derived from biomass. However, its high corrosivity and poor thermal stability have limited its widespread use as a drop-in fuel. One promising method for transforming low-quality biocrudes into drop-in fuels is co-processing with...
-
Fall 2022
The application of dissolvable materials is becoming widely used in hydraulic fracturing, especially in low permeability reservoirs. To date, most of the DAs are based on Al alloys (AAs) or Mg alloys, which offer desirable dissolvability, yet limited mechanical properties. This work aims to...
-
Spring 2022
Filiform corrosion (FFC, also known as under-film corrosion) is commonly observed on surfaces of coated aluminum (Al) and aluminum alloys (AA), especially in environments combining marine and industrial atmosphere. The chemical composition of the substrate is believed to play an important role in...
-
Corrosion Assessment and Mechanisms of Materials in Pre-hydrolysis and Hydrothermal Liquefaction Biorefining Systems
DownloadFall 2022
Advanced biomass conversion technologies, including hot dilute acidic pre-hydrolysis and hydrothermal liquefaction, have been developed for the generation of renewable bioenergy products and biochemicals from existing biomass resources and biowastes. However, the deployment of the technologies is...
-
Fall 2019
An evaluation of the resistance of two different X70 pipeline steels to hydrogen-induced cracking in severe (pH 2.7 and 1 atm H2S) and intermediate (pH 5.5 and 1 atm H2S) sour service conditions was undertaken. The two steels used in this work, X70-X and X70-B, were selected based on their...
-
Investigation of Highly Corrosion Resistant and Electrically Conductive Coatings on Metal Bipolar Plates Used in Polymer Electrolyte Membrane Fuel Cell
DownloadSpring 2019
There are apparent technical and economic advantages to replace carbon-based bipolar plates using metal bipolar plates (MBP) for applications in polymer electrolyte membrane fuel cell (PEMFC). However, MBP suffers from corrosion in the acidic environment of PEMFC, and the subsequently formed...
-
Fall 2017
The present research was conducted with the intent of evaluating the degradation of OCTG (Oil Country Tubular Goods) steel used in SAGD (Steam Assisted Gravity Drainage) applications, and developing a promising surface modification method and a novel composite coating using a technique that will...
-
Spring 2017
Severe localized corrosion was found throughout an aeration tank of a modular wastewater treatment plant. Specifically, pitting, crevice corrosion, galvanic corrosion, and intergranular corrosion (IGC) were observed on the 5000 and 6000 series aluminum alloys used in the tank’s construction. One...
-
Spring 2017
Magnesium remarkably deserves considerable interest from industry especially transportation sector because of its high strength to weight ratio. However, poor wear resistance and low corrosion resistance of magnesium are barriers to extend use of its alloys. Yttrium is one of rare-earth elements...
-
Investigation of Surface Crack Growth Behaviour Under Variable Pressure Fluctuations in Near-Neutral pH Environments
DownloadFall 2017
The goal of this investigation was to study the corrosion fatigue behaviour and mechanisms of surface cracks, semi-elliptical in shape, when exposed to near-neutral pH environments conducive to the environments experienced in the field. To better simulate field conditions, while avoiding the...