Search
Skip to Search Results- 1Abdalrhman, Abdallatif S A
- 1Abdelrahman, Ali Satti Abdellatif
- 1Adesanwo, Toluwanise I J
- 1Afshar, Shima
- 1Agbor, Ezinwa U
- 1Aghaie, Ermia
- 26Department of Civil and Environmental Engineering
- 22Department of Chemical and Materials Engineering
- 6Department of Mechanical Engineering
- 5Department of Renewable Resources
- 4Department of Earth and Atmospheric Sciences
- 1Chemical and Materials Engineering
- 4Gupta, Rajender (Chemical and Materials Engineering)
- 2De Klerk, Arno (Chemical and Materials Engineering)
- 2Gamal El-Din, Mohamed (Civil and Environmental Engineering)
- 2Liu, Qingxia (Chemical and Materials Engineering)
- 2McCaffrey, William (Chemical and Materials Engineering)
- 2Mitra, Sushanta (Mechanical Engineering)
-
Fall 2013
This thesis is a multi-modal exploration of the photographer-researcher as a methodological opportunity to gain multiple, collaborative and collective perspectives on living in relation to the Alberta oil sands zone of North America. Using participatory-photography with youth, this thesis is one...
-
Influence of Amendments and Soil Depth on Available Nutrients and Microbial Dynamics in Contrasting Topsoil Materials Used for Oil Sands Reclamation
DownloadFall 2015
As of December 2013, the cumulative area disturbed by oil sands mining in NE Alberta was 896 km2 out of an estimated final footprint of 4,800 km2 – all of which will require reclamation. Expensive handling costs and scarce soil resources necessitate judicious management and application of...
-
Fall 2013
Solvent extraction of coal is a method to produce low molecular weight products from coal. It also can be used as a pretreatment for Direct Coal Liquefaction to enhance its efficiency. Yield, rate and nature of coal dissolution at low temperatures (25-150°C) and short contact time have been...
-
Fall 2014
An experimental facility was constructed in order to examine the feasibility of the coal bio-conversion under the application of confining pressure. The main purpose of this work was to investigate the effect of confining pressure on methane generation. Core-flooding experiments were conducted...
-
Life Cycle Assessment of Transportation Fuels from Canada’s Oil Sands through Development of Theoretical Engineering Models
DownloadFall 2014
Oil sands in Canada are significant in fulfilling the current and the future energy demands of North America. The development of these resources, besides the increased awareness in global carbon management, has given way to various policy regulations such as the Low Carbon Fuel Standard (LCFS)...
-
Fall 2011
One of the major issues in the current oil sands waste management techniques is a lack of a direct linkage between the long-term mine plans and the quantity of the tailings produced downstream. This research is focused on developing a linkage between oil sands long-term mine plans and the final...
-
Methane Production and Emission Mitigation in Oil Sands Tailings Concurrent with Hydrocarbon Degradation under Nitrogen Limited Conditions
DownloadFall 2020
Alberta’s oil sands generate large volumes of tailings from bitumen ore processing. These tailings ponds produce biogenic methane, which can be measured across 60-80% of the tailings surface. Based on current surface area data and emissions studies, tailings ponds could account for 8% of Canada’s...
-
Spring 2012
Modelling of solvent extraction was studied using 1,2,3,4–tetrahydronaphtalene (tetralin) and Poplar coal (lignite). A kinetic model was developed taking into account temperature, mass transfer limitations and dominating events (physical or chemical) during coal liquefaction. It was found there...
-
Spring 2010
Molecular dynamics simulation and density functional theory were applied to calculate heats of immersion (ΔHimm) of n-heptane, toluene, pyridine and water on two model sand surfaces and two model clay surfaces. Our results indicated that water showed the highest ΔHimm for the model clay surfaces...