Search
Skip to Search Results- 1Adesanwo, Toluwanise I J
- 1Afshar, Shima
- 1Aghaie, Ermia
- 1Amani, Mohammad Javad
- 1Anas Khalil Sidahmed
- 1Baker, Kathleen E.N.
- 54Department of Chemical and Materials Engineering
- 17Department of Civil and Environmental Engineering
- 7Department of Earth and Atmospheric Sciences
- 5Department of Renewable Resources
- 4Department of Mechanical Engineering
- 3Department of Physics
- 5Xu, Zhenghe (Chemical and Materials Engineering)
- 4De Klerk, Arno (Chemical and Materials Engineering)
- 2Froese, Duane (Earth and Atmospheric Sciences)
- 2Guigard, Selma (Department of Civil and Environmental Engineering)
- 2Kuznicki, Steve (Chemical and Materials Engineering)
- 2Liu, Qi (Chemical and Materials Engineering)
-
Bioremediation of oil sands process affected water sourced naphthenic acid fraction compounds
DownloadFall 2020
Current development of Alberta’s oil sands region requires large volumes of water, leading to an abundance of oil sands process affected water (OSPW). OSPW contains naphthenic acid fraction compounds (NAFCs) which have been found to contribute extensively to OSPW toxicity. Degradation of this...
-
Bitumen Extraction, Indigenous Land Conflicts, and Environmental Change in the Athabasca Oil Sands Region, 1963-1993
DownloadSpring 2021
This dissertation examines the first development phase of the Alberta oil sands industry from the 1960s to the early 1990s. It draws on public and private records from archives in Canada and the United States, the results of collaborative research with the Fort McMurray Métis, and oral history...
-
Spring 2016
During the extraction of crude oil or bitumen, stable water-in-oil emulsions are inevitably formed. The emulsified water contains chloride ions and other organic acidic compounds that cause severe corrosion problems to the downstream plant equipment, creating operational and safety issues and...
-
Spring 2015
The minable oil sands extraction process can be understood on a scale of a single oil sand grain. When the oil sand ore is mixed with warm water, each sand granule is initially covered with bitumen film which ruptures under the composite effect of shear and interfacial forces, while water...
-
Boxed-in: Comparing Algorithms for Box-flight Mass-Balance Greenhouse Gas Flux Measurements from Mineable and In Situ Oil Sands Developments
DownloadSpring 2022
To combat global warming, Canada has committed to reducing greenhouse gases (GHGs) 40-45% below 2005 emission levels by 2025. Monitoring emissions and deriving accurate inventories are essential to reaching these goals. GHGs can be measured at a small scale, often using ground measurements which...
-
Fall 2011
The growing interest in the oilsands bitumen reserves, a large portion of which is unattainable by current industrial processes, has generated a need for an improved process for oilsands extracting and upgrading. The effects of using chabazite as a catalyst for cracking and upgrading of oilsands...
-
Fall 2023
At the heart of heavy oil and bitumen upgrading, thermal conversion technologies are found. One such process is visbreaking where bitumen is thermally converted into lighter materials. However, the conversion by visbreaking is limited by the onset of the formation of solid carbonaceous materials...
-
Fall 2013
The high degree of variability of oil sands ores can be attributed to a mixture of different geological end members, i.e., estuarine sand, estuarine clay, marine sand and marine clay. This study focused on the mineralogy, especially of clay minerals, and toluene insoluble organic matter, referred...
-
Characterization of Clay Minerals in the Athabasca Oil Sands in Water Extraction and Nonaqueous Solvent Extraction Processes
DownloadFall 2011
Production of oil from the second largest oil deposit in the world, i.e., the Alberta oil sands containing approximately 13% of total proven oil reserves in the world (169.9 billion barrels), has been shown to be significantly influenced by clay minerals. Clay minerals in particular play a key...
-
Colloid Science of Sand Remediation: A Study Motivated by the Non-Aqueous Extraction of Bitumen from Oil Sands
DownloadFall 2014
The current water-based method of bitumen extraction requires withdrawal of fresh water from the Athabasca River — a practice which leads to the continual buildup of tailings ponds and other environmental concerns. As Alberta’s bitumen production is expected to more than double by 2020, there is...