Search
Skip to Search Results- 1Adamaref, Solmaz
- 1Afshar, Shima
- 1Aghaie, Ermia
- 1Algosayir, Muhammad M
- 1Amani, Mohammad Javad
- 1Amirian, Ehsan
- 53Department of Chemical and Materials Engineering
- 43Department of Civil and Environmental Engineering
- 10Department of Mechanical Engineering
- 6Department of Earth and Atmospheric Sciences
- 5Department of Renewable Resources
- 2Department of Chemistry
- 5Chalaturnyk, Rick (Civil and Environmental Engineering)
- 5Xu, Zhenghe (Chemical and Materials Engineering)
- 4De Klerk, Arno (Chemical and Materials Engineering)
- 4Nouri, Alireza (Civil and Environmental Engineering)
- 3Huang, Biao (Chemical and Materials Engineering)
- 3Leung, Juliana (Civil and Environmental Engineering)
-
Spring 2021
Alberta’s oil sands deposits are the third-largest proven crude oil reserve in the world. However, only 20% of the bitumen in Alberta’s oil sands are shallow enough to be recoverable by surface mining techniques; the remaining 80% can only be extracted using in-situ techniques that involve the...
-
Spring 2015
Steam assisted gravity drainage (SAGD) method is the main oil extraction method in Alberta that produces a huge volume of waste water. This thesis is focused on investigating the viability of membrane processes, as emerging water treatment technologies, for treatment of SAGD produced water. Three...
-
Turbidity Mitigation in an Oil Sands End Pit Lake through pH Reduction and Fresh Water Addition
DownloadFall 2016
The remediation of oil sands wastes such as fluid fine tailings (FFT) and oil sands process-affected water (OSPW) are of increasing concern in the oil sands industry. End pit lakes are one remediation option currently being researched at commercial scale in Base Mine Lake (BML) operated by...
-
Understanding stability of water-in-diluted bitumen emulsions by colloidal force measurements
DownloadSpring 2011
Removal of emulsified water is a challenge in oil sands and heavy oil processing. The flocculation and coagulation of emulsified water droplets depend on the interactions between the water droplets covered mainly by asphaltenes and oil-contaminated fine solids. To quantitatively evaluate the...
-
Understanding the Role of Caustic Addition: A Comparison of Sodium Hydroxide and Ammonium Hydroxide
DownloadSpring 2012
To understand the role of caustic addition and its effect on the bitumen extraction process, a novel flow cell and a Denver Cell extraction unit were utilized. This allowed for the comparison of sodium hydroxide and ammonium hydroxides effect on real oil sands ores. Several ores (A1, C-ore,...
-
Use of a solvent in the oxidative desulfurization of bitumen via autoxidation; effects on viscosity and oxidation
DownloadSpring 2014
This work describes the effect that including a solvent in the reaction media of the autoxidation of Cold Lake bitumen has on the viscosity and also on the oxidation degree reached. The comparison of viscosity was performed both in the basis of equal residence time and equal oxygen conversion...
-
Fall 2012
The kinetics of vapor phase cracking of bitumen derived heavy gas oil and the quality of liquid products were investigated at temperatures of 600-700 °C. Fixed and condensed gases were analyzed by gas chromatography. The quality of liquid products was characterized using simulated distillation,...
-
Wave Speed Measurements of Grosmont Formation Carbonates: Implications for Time-Lapse Seismic Monitoring
DownloadFall 2019
The Grosmont Formation is a Devonian-aged carbonate platform complex that is estimated to hold over 64.5 billion m3 (406 billion bbl) of bitumen in place, accounting for a significant portion of Canada’s total hydrocarbon reserves. Despite this, the Grosmont formation has largely been undeveloped...