Search
Skip to Search Results- 1Anas Khalil Sidahmed
- 1Cossey, Heidi
- 1Dousti, Mohammad Reza
- 1Johnson, Thomas W
- 1Khan, Muhammad F
- 1La, Helen
- 2Bayat, Alireza (Civil Engineering)
- 2Guigard, Selma (Department of Civil and Environmental Engineering)
- 1Babadagli, Tayfun (Civil & Environmental Engineering)
- 1Babadagli, Tayfun (Civil Engineering)
- 1Bindiganavile, Vivek (Civil and Environmental Engineering)
- 1Boluk, Yaman (Civil and Environmental Engineering)
-
Spring 2014
Mining haul trucks are operated on different ground conditions subjected to adverse shock loading, creating the need to give more attention to the truck components like suspension, tire, and the operating ground. Extensive experimental research has been done on these components at scale. In...
-
Spring 2020
Canada has the 7th largest road network in the world with a total of 1.13 million kilometers (40% paved and 60% unpaved). Rise in traffic volumes, increased vehicle axle loading, extremely low air temperatures and seasonal freeze-thaw cycles have resulted in decreased performance of the asphalt...
-
Fall 2014
The extraction of bitumen from oil sands in Alberta, Canada, leads to the creation of tailings that are contained in lake-sized ponds under zero discharge policy. Stratification of tailings over time leads to the formation of mature fine tailings (MFT), an oil based emulsion containing residual...
-
Development of Solvent Selection Criteria Based on Diffusion Rate, Mixing Quality, and Solvent Retrieval for Optimal Heavy-Oil and Bitumen Recovery at Different Temperatures
DownloadFall 2015
Heavy-oil and bitumen recovery requires high recovery factors to offset the extreme high cost of the process. Attention has been given to solvent injection for this purpose and it has been observed that high recoveries are achievable when combined with steam injection. Heavier (“liquid”) solvents...
-
Fall 2020
Concerns over the environmental impacts of thermal production methods for bitumen and heavy oil have led to the exploration of alternative technologies including solvent-assisted production methods. While solvent-assisted production methods have been studied extensively, apparent diffusion rates...
-
Effect of Cellulose Nanocrystal Particles on Rheology, Transport and Mechanical Properties of Oil Well Cement Systems
DownloadSpring 2018
The increase in oil consumption during the past few decades, coupled with oil/gas extraction from shale in the recent years has increased drilling and cementing demands. Well cementing operation is one of the most crucial and important steps in any well completion. However, since it takes place...
-
Evaluating the transport and removal of coated microspheres as Cryptosporidium surrogates in drinking water filtration
DownloadFall 2015
A glycopolymer-modified microsphere surrogate for Cryptosporidium was developed, characterized, and used in filtration experiments. Several surrogates were investigated (yeast, unmodified microspheres, glycoprotein-modified microspheres), and then compared to Cryptosporidium oocysts....
-
Experimental Study on Effect of hydrophobicity on Polymer Conformations, Rheology and Flow in Porous Media
DownloadFall 2023
Typically, polymer screening for enhanced oil recovery operations is done based on viscosity, viscosity dependent molecular weight correlations, and concentration. However, direct measurement of molecular weight and Molecular Weight Distribution (MWD) along with the other conformational...
-
Spring 2011
Extraction of hydrocarbons from an Athabasca oil sand slurry were conducted using supercritical carbon dioxide (SC-CO2). The oil sand was slurried to a 1:1 ratio with water and experiments were conducted using a laboratory-scale batch supercritical fluid extraction (SFE) system. Preliminary tests...
-
Extraction of Hydrocarbons from Bitumen and Bitumen-containing Process and Process Waste Streams using Supercritical Carbon Dioxide
DownloadSpring 2019
Extractions of hydrocarbons from bitumen and bitumen-containing process and process waste streams generated from surface mined oil sands were conducted using supercritical carbon dioxide (SC-CO2). Dynamic extractions were performed on a bench-scale batch supercritical fluid extraction (SFE)...