Search
Skip to Search Results- 1Anas Khalil Sidahmed
- 1Cossey, Heidi
- 1Dousti, Mohammad Reza
- 1Goncalves, Jose Roberto
- 1Hamza, Ehab AM
- 1Johnson, Thomas W
- 2Bayat, Alireza (Civil Engineering)
- 2Bindiganavile, Vivek (Civil and Environmental Engineering)
- 2Boluk, Yaman (Civil and Environmental Engineering)
- 2Chalaturnyk, Rick (Civil and Environmental Engineering)
- 2Guigard, Selma (Department of Civil and Environmental Engineering)
- 1Al-Hussein, Mohamed (Civil and Environmental Engineering)
-
Spring 2014
Mining haul trucks are operated on different ground conditions subjected to adverse shock loading, creating the need to give more attention to the truck components like suspension, tire, and the operating ground. Extensive experimental research has been done on these components at scale. In...
-
An Experimental and Numerical Study on Complex Behaviour of Cement Paste under SAGD Operating Conditions
DownloadSpring 2020
During the exploration stage for oil sands mining or in situ thermal projects, many wells are drilled to recover core for resource assessment: these wells are referred to as stratigraphic wells. These stratigraphic wells are subsequently plugged with either thermal or non-thermal quality cement...
-
Spring 2020
Canada has the 7th largest road network in the world with a total of 1.13 million kilometers (40% paved and 60% unpaved). Rise in traffic volumes, increased vehicle axle loading, extremely low air temperatures and seasonal freeze-thaw cycles have resulted in decreased performance of the asphalt...
-
Fall 2014
The extraction of bitumen from oil sands in Alberta, Canada, leads to the creation of tailings that are contained in lake-sized ponds under zero discharge policy. Stratification of tailings over time leads to the formation of mature fine tailings (MFT), an oil based emulsion containing residual...
-
Development of Solvent Selection Criteria Based on Diffusion Rate, Mixing Quality, and Solvent Retrieval for Optimal Heavy-Oil and Bitumen Recovery at Different Temperatures
DownloadFall 2015
Heavy-oil and bitumen recovery requires high recovery factors to offset the extreme high cost of the process. Attention has been given to solvent injection for this purpose and it has been observed that high recoveries are achievable when combined with steam injection. Heavier (“liquid”) solvents...
-
Fall 2020
Concerns over the environmental impacts of thermal production methods for bitumen and heavy oil have led to the exploration of alternative technologies including solvent-assisted production methods. While solvent-assisted production methods have been studied extensively, apparent diffusion rates...
-
Effect of Cellulose Nanocrystal Particles on Rheology, Transport and Mechanical Properties of Oil Well Cement Systems
DownloadSpring 2018
The increase in oil consumption during the past few decades, coupled with oil/gas extraction from shale in the recent years has increased drilling and cementing demands. Well cementing operation is one of the most crucial and important steps in any well completion. However, since it takes place...
-
Fall 2019
The most common detrimental processes that lead to reduction in durability in reinforced concrete elements are shrinkage, sulphate attack and chloride attack. Shrinkage is a dimensional instability chiefly caused by a loss of moisture in the hydrating cement paste. Soluble sulphate ions take part...
-
Effect of Temperature, Phase Change, and Chemical Additive on Interfacial Properties and Performance of Steam Applications
DownloadFall 2019
When considering the wettability state during steam applications, we find that most issues remain unanswered. Removal of polar groups from the rock surface with increasing temperature improves water wettability; however, other factors, including phase change, play a reverse role. In other words,...
-
Evaluation of Mechanical Performance of Asphalt Emulsion Stabilized Base Course Using Asphaltenes or Cement
DownloadFall 2021
Civilization has become highly reliant on the road industry in recent years for both commercial and personal purposes. A typical road's function is to promote traffic flow comfortably and safely. The pavement is a structure made up of natural ground with varying layers on top that can distribute...