Search
Skip to Search Results- 1Abraham, Tinu M
- 1Adegoroye, Adebukola
- 1Ahmed, Nirob
- 1Ali, Babkir SM
- 1Amundarain, Jesus
- 1Ansari, Nesma Nasir
- 80Department of Chemical and Materials Engineering
- 22Department of Civil and Environmental Engineering
- 14Department of Mechanical Engineering
- 13Department of Renewable Resources
- 7Department of Biological Sciences
- 3Department of Earth and Atmospheric Sciences
- 15Xu, Zhenghe (Chemical and Materials Engineering)
- 6Liu, Qingxia (Chemical and Materials Engineering)
- 5Lipsett, Michael (Mechanical Engineering)
- 4Masliyah, Jacob (Chemical and Materials Engineering)
- 3Gray, Murray (Chemical and Materials Engineering)
- 3Gray, Murray R. (Chemical and Materials Engineering)
-
A Molecular Dynamics Study of the Dissolution of Asphaltene Model Compounds in Supercritical Fluids
DownloadSpring 2011
The demand for a new solvent to treat oilsands was behind the purpose of this project; molecular dynamics simulation was used in this study. Supercritical water, supercritical carbon dioxide and other selected organic solvents in their supercritical state were studied. Meso-tetraphenyl porphyrin...
-
Fall 2011
A cationic thermal sensitive polymer, polyN-isopropylacrylamide-co-N-[3-(Dimethylamino)propyl]methacrylamide (CP) of different molar ratios, known as CP05 and CP10 was synthesized in-house. By doping aluminum hydroxide (Al(OH)3) colloids into CP during the polymerization process, a novel hybrid...
-
A Preliminary Study on Pyrolysis and Gasification of Asphaltenes and Coal-Asphaltenes Slurry in Entrained Flow Reactor
DownloadFall 2012
The aim of this work is to study pyrolysis of coal-asphaltenes slurry in an atmospheric entrained flow reactor. Athabasca asphaltenes and Genesee coal, both from Alberta in Canada, were selected as the feedstock. Char characteristics and the structure of asphaltenes and slurry chars including...
-
Spring 2013
As one of the most critical steps to recover valuable particles from a slurry using flotation, knowledge of the drainage of the thin liquid film between an air bubble and a solid surface is required. The main focus of this thesis is to develop and use an integrated thin film drainage appratus...
-
Spring 2011
A Surface Forces Apparatus (SFA) was used in this study to investigate the fundamental surface forces in oil sand processing research. Asphaltene coated surfaces were chosen as the research topic due to the critical role of asphaltenes in oil sands processing, from bitumen extraction, froth...
-
Fall 2013
Two alkyl-bridged aromatic compounds, with molecular weights of 899.70 g/mol and 1127.99 g/mol, were thermally cracked with 1-hexadecene, 1- octadecene, or trans-stilbene, in a batch microreactor at 375–430 °C for 15 to 45 min. The objective of the study was to investigate the kinetics of the...
-
Spring 2010
The technique of Inverse Gas Chromatography (IGC) was employed for the study of the interactions between various organic solvents with various types of the major inorganic materials (clay minerals and sand) found in Alberta’s oil sands. Heat of adsorption (-∆H) was measured for each solvent with...
-
Spring 2014
Environmental concerns about water-based extraction necessitate the development of an alternative non-aqueous extraction method. One of the challenges that any non-aqueous extraction process is encountered is the elimination of suspended fine solids from solvent-diluted bitumen. This study...
-
Spring 2021
At different stages during the extraction of bitumen from the Athabasca oil sands, the removal of unwanted fine solids whether suspended in aqueous or non-aqueous liquids continues to present serious challenges to the oil sands industry. These fine solids are unique in that their colloidal...