Search
Skip to Search Results- 1Afshar, Shima
- 1Aghaie, Ermia
- 1Badiozamani Tari Nazari, Mohammad Mahdi
- 1Baker, Kathleen E.N.
- 1Beier, Nicholas A
- 1Brandon, Jordan T
- 18Department of Chemical and Materials Engineering
- 16Department of Civil and Environmental Engineering
- 5Department of Renewable Resources
- 3Department of Earth and Atmospheric Sciences
- 2Department of Mechanical Engineering
- 1Chemical and Materials Engineering
- 2Gamal El-Din, Mohamed (Civil and Environmental Engineering)
- 2Soares, Joao (Chemical and Materials Engineering)
- 2Ulrich, Ania (Department of Civil and Environmental Engineering)
- 2Zeng, Hongbo (Chemical and Materials Engineering)
- 1Askari-Nasab, Hooman (Civil and Environmental Engineering)
- 1Beier, Nicholas (Civil and Environmental Engineering)
-
Spring 2010
Molecular dynamics simulation and density functional theory were applied to calculate heats of immersion (ΔHimm) of n-heptane, toluene, pyridine and water on two model sand surfaces and two model clay surfaces. Our results indicated that water showed the highest ΔHimm for the model clay surfaces...
-
Fall 2011
One of the major issues in the current oil sands waste management techniques is a lack of a direct linkage between the long-term mine plans and the quantity of the tailings produced downstream. This research is focused on developing a linkage between oil sands long-term mine plans and the final...
-
Productivity and carbon accumulation potential of transferred biofilms in reclaimed oil sands-affected wetlands
DownloadSpring 2011
Biofilms are significant contributors to primary production, nutrient cycling, bio-stabilization and the food web of wetland ecosystems. Photoautotrophic biomass (PB) and primary production (PP) were determined for biofilms exposed to various treatments and materials in wetlands near Fort...
-
Application of coagulation-flocculation process for treating oil sands process-affected water
DownloadFall 2011
Oil Sands Process-Affected Water (OSPW) is generated from oil sands operation processes such as mining, extraction, and upgrading. Currently, accumulated OSPW is temporarily stored in tailings ponds which are toxic to the environment and must be treated for either reuse or safe discharge in the...
-
Tarring the Oil Sands: The Evolution and Emergence of ENGO Opposition in Alberta’s Oil Sands and Social Movement Theory
DownloadFall 2012
ABSTRACT: The Alberta oil sands represent tremendous economic growth and prosperity for Alberta and Canada but their development does not come without cost. Environmental Non-Governmental Organizations (ENGOs), specifically the Pembina Institute and Greenpeace, have brought significant attention...
-
Spring 2012
Tailing ponds in Northern Alberta has covered an area of 170 km2. Directive 074 issued in 2009 set stringent criteria for tailings reclamation. Freeze-thaw dewatering is one of the most promising approaches for dewatering MFT as one cycle of freeze-thaw can release up to 50% pore water. In this...
-
Removal of Organic and Inorganic Contaminants from Oil Sands Tailings using Carbon Based Adsorbents and Native Sediment
DownloadFall 2013
The extraction and refinement of oil sands bitumen produces substantial quantities of liquid tailings and solid coke. Tailings contain metals and naphthenic acids, which require remediation before mine closure. Adsorption is a potential remediation technique which may reuse stockpiled petroleum...
-
Fall 2013
The high degree of variability of oil sands ores can be attributed to a mixture of different geological end members, i.e., estuarine sand, estuarine clay, marine sand and marine clay. This study focused on the mineralogy, especially of clay minerals, and toluene insoluble organic matter, referred...
-
Spring 2013
The mining of oil sands ore and extraction of bitumen produces aqueous slurries containing bitumen, coarse sand and fine clays. The performance of key process units is highly dependent on the rheology of “carrier fluid”, which is comprised of the fine solids and water. Although viscosity is...
-
Subsurface Geophysical Characterization of the Crystalline Canadian Shield in Northeastern Alberta: Implications for Geothermal Development
DownloadFall 2013
In northern Alberta, existing heat flow and geothermal gradient studies suggest that using geothermal heat in oil sands processing would require deep drilling of the crystalline Canadian Shield. Using a 2.36 km deep borehole located near Fort McMurray, the goal of this study is to investigate the...