Search
Skip to Search Results- 1Abtahi, Shaghayegh
- 1Aghaie, Ermia
- 1Ahmed, Ezz Q
- 1Arango Vasquez,Daniela
- 1Behnamian, Yashar
- 1Beljan, Ivan J.
-
A Comparative Analysis on Sewer Structural Condition Grading Systems Using Four Sewer Condition Assessment Protocols
DownloadFall 2012
Pipeline condition assessment is a primary task in running an efficient urban asset management program because in the case of system failure, the consequences can be significant to both municipalities and users. Selecting a suitable assessment protocol is crucial for municipalities, since the...
-
Fall 2017
Pipelines form an integral component of the distribution network of oil and gas products, which have to be transported from production sites to markets far off where there is need for them. Pipelines thus have to traverse long distances and as any other structure are susceptible to damages with...
-
Spring 2017
Buried pipelines that share a common corridor with nearby overhead AC power lines experience voltage induction. The induced voltages can cause personnel safety and pipeline corrosion problems. Industry has a requirement to reduce the induced voltages below an acceptable level. In view of the...
-
Fall 2023
Tribocorrosion, a synergistic impact of wear and corrosion, impacts the lifespan of machine parts in most sectors. Consequently, duplex coating has emerged as the most promising solution to address tribocorrosion. In this work, advanced noble duplex coating systems of TiAlN/WC-NiBSi/steel and...
-
Corrosion Assessment and Mechanisms of Materials in Pre-hydrolysis and Hydrothermal Liquefaction Biorefining Systems
DownloadFall 2022
Advanced biomass conversion technologies, including hot dilute acidic pre-hydrolysis and hydrothermal liquefaction, have been developed for the generation of renewable bioenergy products and biochemicals from existing biomass resources and biowastes. However, the deployment of the technologies is...
-
Spring 2013
As the Supercritical Water-cooled Reactor (SCWR) shows a promising future, the corrosion behavior of candidate materials has attracted great interest. In this study, experimental investigation was conducted to evaluate the corrosion behavior of the ferritic-martensitic steels designed for the use...
-
Fall 2015
The present research has been done with the intent of evaluating the corrosion resistance and cracking susceptibility of some commercial candidate alloys that can be potentially used in Gen-IV supercritical water reactor (SCWR). The mechanism of the crack initiation in austenitic alloys exposed...
-
Spring 2017
Severe localized corrosion was found throughout an aeration tank of a modular wastewater treatment plant. Specifically, pitting, crevice corrosion, galvanic corrosion, and intergranular corrosion (IGC) were observed on the 5000 and 6000 series aluminum alloys used in the tank’s construction. One...
-
Spring 2015
This thesis presents a thorough examination of the corrosion and fouling behaviour of crude oil at refining conditions on industrially applicable heat transfer surfaces. The depletion of light sweet crude oil reserves means that the processing of ever heavier and more sour crude oils is...