Search
Skip to Search Results- 1Afshar, Shima
- 1Aldhaleai, Ahmed Mahmood
- 1Amani, Mohammad Javad
- 1Anas Khalil Sidahmed
- 1Bhushan, Vivek
- 1Black, Meghan E
- 43Department of Chemical and Materials Engineering
- 13Department of Civil and Environmental Engineering
- 8Department of Mechanical Engineering
- 4Department of Earth and Atmospheric Sciences
- 3Department of Physics
- 2Department of Chemical Engineering
- 5Xu, Zhenghe (Chemical and Materials Engineering)
- 4De Klerk, Arno (Chemical and Materials Engineering)
- 2Guigard, Selma (Department of Civil and Environmental Engineering)
- 2Liu, Qi (Chemical and Materials Engineering)
- 2Nobes, David (Mechanical Engineering)
- 2Yeung, Anthony (Chemical and Materials Engineering)
-
Development of an Experimental Apparatus for Studying the Effects of Acoustic Excitation on Viscosity
DownloadFall 2012
An experimental apparatus was developed capable of measuring changes in fluid viscosity occurring due to acoustic stimulation. Controls allowed measurements at simulated oil sand reservoir pressures and temperatures with near real-time data visualization. Calibration was performed...
-
Development of Solvent Selection Criteria Based on Diffusion Rate, Mixing Quality, and Solvent Retrieval for Optimal Heavy-Oil and Bitumen Recovery at Different Temperatures
DownloadFall 2015
Heavy-oil and bitumen recovery requires high recovery factors to offset the extreme high cost of the process. Attention has been given to solvent injection for this purpose and it has been observed that high recoveries are achievable when combined with steam injection. Heavier (“liquid”) solvents...
-
Fall 2020
Concerns over the environmental impacts of thermal production methods for bitumen and heavy oil have led to the exploration of alternative technologies including solvent-assisted production methods. While solvent-assisted production methods have been studied extensively, apparent diffusion rates...
-
Fall 2009
The extraction of bitumen (heavy oil) from the oil sands is predominantly achieved through a water-based technology. This involves a slurrying process, typically called conditioning, which is categorized into three equally important steps: bitumen-sand liberation, bitumen coalescence, and...
-
Spring 2014
In bitumen recovery from oil sands, a percentage of the bitumen is lost to tailings. The effect of fugitive bitumen on fines settling and consolidation in tailings ponds remains controversial. In the current study, the settling performance of mature fine tailings (MFT) in response to flocculant...
-
Spring 2022
This study investigated the mechanisms driving the dewatering and strength behaviour of polymer amended treated (centrifuged and in-line thickened tailings/ILTT) deep tailings deposits undergoing seasonal weathering dominated by a) multiple freeze-thaw cycles and b) alternating freeze-thaw and...
-
Estimation of the Evaporation Rate of an Isolated Water Microdroplet Subjected to Infrared Radiative Heating
DownloadFall 2014
A combined numerical-experimental investigation was performed to study the influence of infrared radiation on the evaporation of a single-component droplet in the range between 10 and 50 micrometers, under different environmental conditions of relative humidity and temperature of air. A numerical...
-
Spring 2017
The formation of stable water-in-oil emulsions during oil sands extraction process causes a number of operational issues, such as equipment corrosion, storage and transportation problems. One common method for emulsion breakup in industry is to use chemical demulsifiers. The chemical demulsifiers...
-
Fall 2017
Although evaporation is considered to be a surface phenomenon, the rate of molecular transport across a liquid–vapor boundary is strongly dependent on the coupled fluid dynamics and heat transfer in the bulk fluids. Recent experimental thermocouple measurements of the temperature field near the...
-
Experimental investigation on evaporation induced convection in water using laser based measurement techniques
DownloadFall 2010
Recent studies showed that evaporation of water can induce surface tension gradients along the water surface and ultimately lead to convection, known as Marangoni convection. This study was devoted to visualization and characterization of the evaporation-induced, surface-tension-driven convection...