Search
Skip to Search Results- 1ALBAHLANI, ALMUATASIM MOHAMMED
- 1Ahmed, Nirob
- 1Alizadehgiashi, Moien
- 1Amani, Mohammad Javad
- 1Amundarain, Jesus
- 1Ansari, Nesma Nasir
- 51Department of Chemical and Materials Engineering
- 9Department of Civil and Environmental Engineering
- 4Department of Mechanical Engineering
- 3Department of Chemistry
- 2Department of Agricultural, Food, and Nutritional Science
- 1Civil and Environmental Engineering
- 6Xu, Zhenghe (Chemical and Materials Engineering)
- 3Gupta, Rajender (Chemical and Materials Engineering)
- 3Liu, Qingxia (Chemical and Materials Engineering)
- 3Zeng, Hongbo (Chemical and Materials Engineering)
- 2Babadagli, Tayfun (Department of Civil and Environmental Engineering)
- 2Beaulieu, Christian (Biomedical Engineering)
-
Fall 2012
This thesis explored the properties of asphaltene nano-aggregates in crude oil and toluene based solutions and fouling at process furnace temperatures, and the links between these two phenomena. The link between stability of asphaltenes at ambient conditions and fouling at the conditions of a...
-
Fall 2016
Athabasca oil sands contain 8 to 14% bitumen and are recovered using surface mining or steam assisted gravity drainage (SAGD). During primary upgrading of bitumen, the vacuum residuum from the distillation column is sent to the solvent de-asphalting unit where a paraffinic solvent is used to...
-
Fall 2015
Canadian oilsands bitumen contains one of the highest amounts of asphaltenes (16-20 wt %) among all crude oils. Asphaltenes are the lowest value fraction of bitumen. It differs from the other fractions of bitumen because of its insolubility in paraffinic solvents. Asphaltenes are insoluble in...
-
Fall 2020
Asphalt pavements are the most common type of pavements in North America. Increasing traffic demand, harsh weather conditions, and the tendency for infrastructure operators to reduce the cost (and, therefore, the frequency) of maintenance are the major reasons for asphalt performance improvement...
-
Spring 2013
The self-association properties of two model compounds of asphaltene, 2,6-bis[2-(pyren-1-yl)ethyl]pyridine (PyPPy, C41H29N) and 2,6-bis[2-(phenanthren-9-yl)ethyl]pyridine (PhPPh, C37H29N), were studied in deuterated chloroform and deuterated methylene chloride. 1H NMR spectroscopy titration...
-
Fall 2009
β-Glucan is a soluble fibre shown to help regulate blood sugar and lower cholesterol. Incorporation into food, particularly bread, may affect β-glucan’s physicochemical properties and health benefits. The journey of β-glucan through the mixing, fermenting, baking, and storage of bread was...
-
Fall 2015
Oil sands found in Athabasca and Cold Lake regions of Northern Alberta form Canada’s primary source of energy reserves. Asphaltenes, a significant part of bitumen is often considered to be the least valuable component of crude oil due to various factors such as difficulty in transporting and...
-
Spring 2016
During the extraction of crude oil or bitumen, stable water-in-oil emulsions are inevitably formed. The emulsified water contains chloride ions and other organic acidic compounds that cause severe corrosion problems to the downstream plant equipment, creating operational and safety issues and...
-
Characterization of asphaltene molecular structures by cracking under hydrogenation conditions and prediction of the viscosity reduction from visbreaking of heavy oils
DownloadSpring 2013
The chemical building blocks that comprise petroleum asphaltenes were determined by cracking samples under conditions that minimized alterations to aromatic and cycloalkyl groups. Hydrogenation conditions that used tetralin as hydrogen-donor solvent, with an iron-based catalyst, allowed...
-
Characterization of Athabasca asphaltenes separated physically and chemically using small-angle X-ray scattering
DownloadFall 2010
Athabasca asphaltenes were characterized using small-angle X-ray scattering (SAXS) with synchrotron radiation. Two methods were used to separate asphaltenes from Athabasca bitumen. Conventional chemical separation by precipitation with n-pentane, and physical separation realized by passing...