Search
Skip to Search Results- 1Beltaos, Angela M
- 1Davis, Matthew, B
- 1Dickau, Matthew A
- 1Erland, Broghan
- 1Ghazi, Rouzbeh
- 1Golshahi, Laleh
-
Fall 2012
Glancing angle deposition (GLAD) is a physical vapour deposition (PVD) technique capable of fabricating highly porous thin films with controllable film morphology on the 10 nm length scale. The GLAD process is flexible and may be used on virtually any PVD-compatible material. This makes GLAD a...
-
Fall 2016
Athabasca oil sands contain 8 to 14% bitumen and are recovered using surface mining or steam assisted gravity drainage (SAGD). During primary upgrading of bitumen, the vacuum residuum from the distillation column is sent to the solvent de-asphalting unit where a paraffinic solvent is used to...
-
Fall 2023
Background: The COVID-19 pandemic has shown us that our infection prevention and control (IPC) knowledge has some glaring gaps on what best ways to treat dental patients, leading to a flurry of research to understand the best mitigation strategies to reduce aerosols. One of these strategies...
-
Boxed-in: Comparing Algorithms for Box-flight Mass-Balance Greenhouse Gas Flux Measurements from Mineable and In Situ Oil Sands Developments
DownloadSpring 2022
To combat global warming, Canada has committed to reducing greenhouse gases (GHGs) 40-45% below 2005 emission levels by 2025. Monitoring emissions and deriving accurate inventories are essential to reaching these goals. GHGs can be measured at a small scale, often using ground measurements which...
-
Characterization of Aerosol Deposition in Children and Infants Using Idealized Extrathoracic Geometries
DownloadFall 2014
This thesis describes a number of experimental studies performed with the common goal of characterizing pharmaceutical aerosol deposition in children and infants using idealized extrathoracic geometries. First, an in vitro study of the recently proposed Alberta Idealized Child Throat showed that...
-
Characterization of Particulate Matter Morphology and Volatility for Two Direct-Injection Engines
DownloadFall 2015
Particulate matter emitted from two direct injection engines has been characterized by morphology, volatility, mass-mobility exponent, effective density, and size distribution using tandem measurements from a centrifugal particle mass analyzer (CPMA) and differential mobility analyzers (DMA). The...
-
Spring 2015
Colloidal-collector interactions are of fundamental importance in separation and filtration technologies. Here, the effect of collector grains on the behavior of colloidal particles was studied in two different experimental systems, i.e., column studies with stationary collectors and batch mixing...
-
Spring 2024
This work aims to conduct a techno-economic feasibility analysis of adopting a hybrid approach to hydrogen generation. This includes grey hydrogen sourced from natural gas using Steam Methane Reforming (SMR) and green hydrogen from renewable energy. The key focus is on assessing the environmental...
-
Development and Applications of an Emissions Micro-Simulation Tool for Transportation Infrastructure Design
DownloadFall 2014
Transportation emissions constitute a significant portion of overall emissions inventories, and contribute to air quality health concerns. Reductions in transportation emissions can be achieved through efficient design of infrastructure, effective policy and regulation, and informed planning...
-
Development of Empirical Models to Predict Deposition of Aerosols in the Extrathoracic Airways of Children
DownloadSpring 2012
The experimental studies described in this thesis were performed with the goal of measuring deposition of aerosols, inhaled either nasally or orally, in the extrathoracic airways of children in different age groups. We pursued in vitro methods and characterized the deposition of aerosols in the...