Search
Skip to Search Results- 1ALBAHLANI, ALMUATASIM MOHAMMED
- 1Alizadehgiashi, Moien
- 1Athar, Khan S
- 1Baron, Corey A
- 1Beaton, Neil I.
- 1Boddez, Jason Bradley
- 16Department of Mechanical Engineering
- 9Department of Chemical and Materials Engineering
- 5Department of Civil and Environmental Engineering
- 4Department of Electrical and Computer Engineering
- 3Department of Earth and Atmospheric Sciences
- 2Department of Agricultural, Food, and Nutritional Science
-
Spring 2016
A dual-fuel system is used to control HCCI combustion timing and load in a CFR engine. The systems steady-state response to iso-octane and n-heptane injected energy is investigated then a dynamic ARMAX model is found using system identification. This model is used to design a norm-optimal...
-
Lab to Field Scale Modeling of Low Temperature Air Injection with Hydrocarbon Solvents for Heavy-Oil Recovery in Naturally Fractured Reservoirs
DownloadFall 2015
Alternatives for enhanced oil recovery processes in heavy oil containing deep naturally fractured reservoirs (NFR) are limited due to excessive heat losses when steam is injected. Air injection at high temperature oxidation conditions (in-situ combustion) has been considered as an alternative to...
-
Lithium Recovery from Hydraulic Fracturing Flowback and Produced Water using a Manganese-Based Sorbent
DownloadFall 2020
Increased demand for lithium products for use in lithium ion batteries has led to a search for new lithium resources in recent years in order to meet projected future consumption. One such potential lithium resource is low lithium bearing brines that are discharged from hydraulically fractured...
-
Spring 2010
The demand for accurate bitumen-pentane mass transfer data was the main motivation behind this research. Difficulties such as complex phase behavior, high viscosity and opacity of the hydrocarbon invariably lead to failure of conventional techniques to measure mass transfer coefficients...
-
Fall 2016
Different model based control strategies are developed for combustion timing and load control in a single cylinder Homogeneous Charge Compression Ignition (HCCI) engine. In HCCI engines, a lean homogeneous air-fuel mixture auto-ignites due to compression and the resulting combustion occurs at...
-
Spring 2013
In this thesis, methods for improving needle steering during prostate brachytherapy are studied. Brachytherapy is a minimally-invasive, out-patient therapy for prostate cancer treatment with a fast recovery time. Success of brachytherapy depends on precise placement of needle tips in pre-planned...
-
Fall 2009
Homogeneous Charge Compression Ignition (HCCI) is a promising method for combustion engines to provide a substantial reduction in fuel consumption and formation of both nitrogen oxides and soot pollutants in automotive and stationary engines. Control of HCCI combustion timing is essential for the...
-
Needle Shape Visualization, Tracking and Steering Control for Permanent Prostate Brachytherapy Applications
DownloadFall 2016
Prostate cancer is one of the most prevalent types of cancers in North American males, afflicting one in eight men over the course of their lifetime. Fortunately, early-stage prostate cancer has a wide variety of treatment options. One such option, permanent prostate brachytherapy, has been...
-
Non-linear reparameterization of complex models with applications to a microalgal heterotrophic fed-batch bioreactor
DownloadSpring 2010
Good process control is often critical for the economic viability of large-scale production of several commercial products. In this work, the production of biodiesel from microalgae is investigated. Successful implementation of a model-based control strategy requires the identification of a model...
-
Nonlinear state-space control design for displacement-based real-time testing of structural systems
DownloadSpring 2011
Moosavi Nanehkaran, Seyed Abdol Hadi
This study presents the nonlinear design of a state space controller to control hydraulic actuators under displacement control, specifically for real-time pseudo-dynamic testing applications. The proposed control design process uses the nonlinear state space model of the dynamics of the system to...