Search
Skip to Search Results- 2Atai, Ali Asghar.
- 2Belay, Tsegay
- 2Bhaduri,Swayamdipta
- 2Brenneis, Dylan
- 2Carrigy, Nicholas B.
- 2Chen, Jie
-
Fabrication and Testing of Inkjet Printed Electrodes for Anion Exchange Membrane Water Electrolysis
DownloadSpring 2022
To study the relatively novel technology of anion exchange membrane (AEM) water electrolysis in a scientific manner, a controllable and repeatable electrode fabrication method is needed. While inkjet printing has been successfully used to fabricate electrodes for proton exchange membrane (PEM)...
-
Fabrication and Wettability Characterization of Electrospun Fibrous Nylon 6/Silica Nanocomposites
DownloadFall 2018
Electrospinning is a simple and versatile method to fabricate polymeric nanofibers and nanocomposites fibers for a wide range of applications。 Electrospun Nylon 6 nanofiber mats have been used in tissue engineering, filtration and protective clothing. Silica nanoparticles are a type of popular...
-
Fall 2012
Clinical point-of-care (POC) diagnosis remains an open and challenging field of research worldwide in which the study of the mechanism and dynamics of protein molecule separation using electrophoresis is of considerable interest. The quality of a protein separation is strongly dependent on the...
-
Fabrication of WC-based Metal Matrix Composite Coatings via Low-pressure Cold Spraying for Enhanced Surface Properties
DownloadFall 2013
A low-cost, low-pressure cold spray unit was used to fabricate tungsten carbide (WC)-based metal matrix composite (MMC) coatings. A variety of coatings were fabricated and characterized. Scanning electron microscopy (SEM), coupled with image analysis, Vickers micro-hardness, and X-ray diffraction...
-
Fabrication, modeling and experimental study of bending deformation of micro-ferrogel fibers in a non-uniform magnetic field
DownloadFall 2009
Hydrogel smart polymers have achieved a great attention in the research area of drug delivery, MEMS/NEMS, microfluidics and sensor design because of their responsiveness to various environmental stimuli- pH, temperature, light, electric field, enzyme etc. This thesis presents the modeling,...
-
Fall 2018
Premature failure occurred in the chlorinated polyvinyl chloride (CPVC) pipes from manufacturer A at the solvent welded joints, while pipes from manufacturer B work normally under similar working conditions. Through characterization of mechanical properties and residual stresses in CPVC pipes...
-
Fatigue Behaviour of Coke Drum Materials and Its Application to Extend the Service Lives of Coke Drums
DownloadFall 2014
Coke drums are vertical pressure vessels used in the delayed coking process in petroleum refineries. They are normally constructed of carbon or low carbon alloy steels internally clad with stainless steel to protect the coke drums from corrosion during operations. Significant temperature...