Search
Skip to Search Results- 3Hasan, Md Monjurul
- 3Kostic, Branislav Z
- 3Yu, Miao
- 2Afifi, Mona
- 2Altaf, Mohammed Sadiq
- 2Alwisy, Aladdin
- 31Al-Hussein, Mohamed (Civil and Environmental Engineering)
- 25Deutsch, Clayton (Civil and Environmental Engineering)
- 23AbouRizk, Simaan (Civil and Environmental Engineering)
- 20Chalaturnyk, Rick (Civil and Environmental Engineering)
- 20Liu, Yang (Civil and Environmental Engineering)
- 18Bayat, Alireza (Civil and Environmental Engineering)
-
Effect of viscoelasticity and alkali on heavy oil EOR performance using HPAM, 'AA-NVP' co- and cross-linked polymers
DownloadSpring 2014
Polymer solutions are characterized based on their viscoelasticity to improve the displacement efficiency for enhanced oil recovery. Contribution of viscoelastic polymers solution’s elasticity on oil recovery needs to be analyzed thoroughly for better screening of polymers for field operations....
-
Effect of Volume Translation on Two-Phase Equilibrium Calculations for Hydrocarbon Mixtures in a Confined Space
DownloadSpring 2020
Oil production from tight/shale reservoirs has drawn an increasing attention over the past decades. One of the essential mechanisms affecting the oil/gas production is the phase behavior of the reservoir fluids in the confined nanopores inside the tight/shale reservoirs. Many theoretical works...
-
Effect of Z-shaped Steel Plate Connectors on Out-of-Plane Flexural Behaviour of Precast Insulated Concrete Panels
DownloadFall 2016
Precast Insulated Concrete Panels (PICP) consist of an insulation layer sandwiched between two concrete layers. The concrete layers of PICP are attached to each other by interlayer mechanical connectors. These panels are widely used in North America as cladding system to provide thermal...
-
Spring 2013
Laboratory testing of rocks is traditionally carried out to determine the peak strength using the ISRM Suggested Methods or other suitable standards. However, it is well known that in low-porosity crystalline rocks there are at least three distinct stages of compressive loading that can be...
-
Effectiveness Evaluation Model for Frontline Worker Safety Intervention: An Exploratory Case Study of a Construction Prefabrication Company
DownloadFall 2016
Frontline foremen and workers play a critical role in implementing management’s safety policies and procedures. Despite the ultimate position in safety organization of frontline foremen and workers, variations in safety competency and acceptance level are often neglected, which leads to diverse...
-
Effects of Adsorbate Properties on Heel Buildup on Activated Carbon Fiber Cloth during Electrothermal Regeneration
DownloadSpring 2017
Automotive painting booths are a major source of volatile organic compounds’ (VOCs) in the automotive manufacturing sector. Adsorption on activated carbon (AC) has been widely used as a low cost and energy efficient VOC control method. A major challenge associated with the cyclic...
-
Effects of Cyclical Load Conditions on Wear Rate and Wear Scar in a Modified ASTM G65 Abrasion Test
DownloadSpring 2016
Wear is an incredibly complicated phenomenon that can occur in many different forms, through a number of modes, facilitated by a variety of mechanisms. Surface mining operations are particularly afflicted by abrasive wear; principally during the excavation process. Shovel geometry has been...