Search
Skip to Search Results- 1325Department of Chemical and Materials Engineering
- 3Department of Biomedical Engineering
- 2Department of Biological Sciences
- 2Department of Laboratory Medicine and Pathology
- 1Department of Civil and Environmental Engineering
- 1Department of Human Ecology
- 2Bendrich, Michelle
- 2El-Thaher, Nayef
- 2Fadic Eulefi, Anton
- 2Hoseinzadeh Hejazi, Sayed Alireza
- 2Hosseininejad, Seyed Shaham Aldin
- 2Karkooti, Amin
- 44Xu, Zhenghe (Chemical and Materials Engineering)
- 40Huang, Biao (Chemical and Materials Engineering)
- 34Liu, Qingxia (Chemical and Materials Engineering)
- 27Henein, Hani (Chemical and Materials Engineering)
- 27Zeng, Hongbo (Chemical and Materials Engineering)
- 20Gupta, Rajender (Chemical and Materials Engineering)
-
The Mechanism of Floc Formation by Hydrodynamic Cavitation and Its Application on Fine Particle Flotation
DownloadFall 2018
In recent decades, hydrodynamic cavitation has been used to enhance fine particle flotation recovery in mineral engineering. Such an increase was mainly attributed to the generation of flocs/aggregates of fine particles during the hydrodynamic cavitation process. However, the mechanism of floc...
-
The Microstructure, Morphology and Mechanical Properties of Rapidly Solidified Al-10wt%Si Alloy
DownloadSpring 2018
Hypoeutectic Al-Si alloys are widely used in both the automotive and aerospace industries, due to their strong corrosion resistance, good castability and relatively high strength-to-weight ratio. Despite this wide use, these alloys have a major limitation related to the Si phase that forms...
-
Spring 2011
Polymers of various types are added to crude oils and oil products to prevent wax deposition, break water-in-oil emulsions, reduce drag in pipelines and to stabilize asphaltenes. In mixtures where a polymer does not adsorb on colloids, two stable liquid phases can arise due to depletion...
-
Fall 2013
In this thesis, a cellulose nanofibril (CNF) preparation method in the biorefinery platform is described, and the product is characterized and compared to commercially available varieties. CNF is a bundle of cellulose microfibrils with diameter in 5-100 nanometer range and length reaching to...
-
The Role of High Molecular Weight Polyethylene Oxide in Reducing Quartz Gangue Entrainment in Chalcopyrite Flotation by Xanthate Collectors
DownloadFall 2011
Fine particles pose two challenging problems to all mineral processors around the world today. The problems are the inefficient collection of hydrophobic particles (low recovery), and mechanical/hydraulic entrainment of hydrophilic gangue particles (low concentrate grade). Extensive research has...
-
The Role of Sulfur during the Cracking of n-Hexadecane and Cold Lake Bitumen with alpha-Fe2O3 and Steam
DownloadSpring 2013
Coke produced during bitumen upgrading has a high heteroatom content and low economic value. To improve feed efficiency, cracking of hexadecane and bitumen with α-Fe2O3 and water has been studied to decrease coke yield, while increasing sulfur content. Compared to thermal cracking, catalytic...