Search
Skip to Search Results-
2017-01-01
Spinelli, J.E., Hearn, W., Bogno, A.-A., Henein, H.
Understanding the influence of rapid solidification conditions on the formed microstructure is important to determine how process conditions affect the final mechanical properties. In this work the rapid solidification of hypoeutectic and hypereutectic Al-xSi (x=10wt. %, 18wt %) alloys was...
-
2019-01-01
Herlach, D.M., Burggraf, S., Reinartz, M., Galenko, P.K., Rettenmayr, M., Gandin, Ch.-A., Henein, H., Mullis, A., Ilbagi, A., Valloton, J.
The dendrite growth velocity in Al75Ni25 melts has been measured in a containerless procedure as a function of undercooling using an electromagnetic levitation technique both in the Earth laboratory and in Space on board the International Space Station. The growth shows an anomalous behavior...
-
Estimation of Droplet Size and Temperature at which Solidification starts in a Drop Tube-Impulse System.
Download2016-01-01
Delshad Khatibi, P., Henein, H.
D2 tool steel powders were produced using a drop tube-impulse atomization technique. In order to measure the radiant energy and droplet size of atomized D2 steel droplets, DPV-2000 (Tecnar Automation Ltée, St. Hubert Quebec, Canada) was utilized. In-situ velocity and droplet size of the atomized...
-
2017-01-01
Valloton, J., Herlach, D.M., Henein, H., Sediako, D.
Rapid solidification of D2 tool steel is investigated experimentally using ElectroMagnetic Levitation (EML) under terrestrial and reduced gravity conditions and Impulse Atomization (IA), a drop tube type of apparatus. IA produces powders 300 to 1400 μm in size. This allows the investigation of a...
-
2017-12-05
Valloton, J., Gawor, S., Henein, H.
Numerous previous researchers have used nucleation models as part of their simulation of droplet solidification. None of these have verified the nucleation portion of these models with experimental results. In this work, a heterogeneous nucleation model based on the classical nucleation theory...
-
2022-01-01
Henein, H., Bogno, A.-A., Yin, S., Natzke, P., Gallerneault, M.
Scandium (Sc) is an expensive alloying element which has an important effect on the properties of aluminum alloys. It is of interest to determine for a variety of solidification conditions the effect of minor addition, in the hypoeutectic levels, of Sc on Al alloys. This study builds on past work...
-
2021-01-01
Yin, S., Bogno, A.-A., Henein, H., Gallerneault, M.
This paper studies the solidification of hypoeutectic Al–Mg–Sc powders and spray deposited (SD) strips, generated by Impulse Atomization. The effects of Mg content in hypoeutectic Al–Mg–Sc was examined with respect to the extended solid solubility of Mg and Sc in α–Al, microstructure refinement...
-
Quantification of Dendritic and Eutectic Nucleation Undercooling in Rapidly Solidified Hypo-Eutectic Al-Cu Droplets
Download2016-01-01
Bogno, A.-A., Delshad Khatibi, P., Henein, H., Gandin, Ch.-A.
This paper reports on the quantification of primary dendritic and eutectic nucleation undercoolings during rapid solidification of impulse atomized hypo-eutectic Al-Cu droplets. The procedure consists in determining the eutectic fraction of each investigated droplet from the fraction of...
-
2018-01-01
Bogno, A.-A., Valloton, J., Jimenez, D.D., Rappaz, M., Henein, H.
Near eutectic Al-Cu droplets were rapidly solidified by Impulse Atomization. A wide range of microstructural scales was obtained at different cooling rates and undercoolings. The micrographs of the investigated samples revealed two distinct zones of different structural morphologies: An undulated...
-
2019-01-01
Valloton, J., Bogno, A.-A., Henein, H., Herlach, D.M., Sediako, D.
This paper reports on the undercooling and growth morphology of Al-4.5wt%Cu and Al-4.5wt%Cu-0.4wt%Sc with a focus on the effect of Sc addition. It is found that the addition of Sc reduces the undercoolings of both primary phase and eutectic. In addition, the morphology of the Al-4.5wt%Cu-0.4wt%Sc...