Search
Skip to Search Results- 1Ali, Mostafa A A
- 1Borle, Steven D
- 1Caputo, Joseph V.
- 1Dewar, Matthew P
- 1Dousti, Mohammad Reza
- 1Dueck, Meghan, E
- 5Driver, Robert (Civil and Environmental Engineering)
- 5Mendez, Patricio (Chemical and Materials Engineering)
- 4Henein, Hani (Chemical and Materials Engineering)
- 3Bindiganavile, Vivek (Civil and Environmental Engineering)
- 2Henein, Hani (Materials Engineering)
- 2Imanpour, Ali (Civil and Environmental Engineering)
-
A Stochastic Finite Element Analysis Framework for the Multiple Physical Modeling of Filler Modified Polymers
DownloadSpring 2021
Hamidreza Ahmadimoghaddamseighalani
Polymers have various attractive properties (e.g., low volume mass density, low cost and excellent degradation resistance), and hence, they have become essential for a wide range of applications (e.g., aerospace, oil and gas and renewable energy industries). However, due to their limited...
-
Fall 2023
Steel fabricators and connection designers in the building construction industry often rely on traditional connection design methods, which involve using connection design software or spreadsheets to simulate and design connections with the goal of minimizing costs associated with fabrication and...
-
Spring 2013
20Cr-32Ni-1Nb stainless steel alloys are commonly used in hydrogen reformer manifolds for transporting hot hydrogen by-products at 750-950 celcius. After long periods of exposure, embrittling secondary carbides and intermetallic phases can precipitate at the grain boundaries which can drastically...
-
Fall 2019
Residual stresses can have a significant impact on the stability of structural members. In the case of I-section beam elements, such stresses can impact lateral--torsional buckling (LTB) capacity, particularly in the inelastic range. I-sections are typically fabricated by either rolling as a...
-
Spring 2014
Seven Ni-WC tubular wires utilized in this study were characterized by the nickel sheath area, powder composition, and overall initial carbide volume fraction of the wire prior to welding. The electrical resistivity of steel, stainless steel, and Ni-WC welding consumables were measured from...
-
Spring 2018
It has become common for steel fabricators to find torsional loads included in the design documents of many industrial steel structures. These loads arise in wide-flange beam-to-column moment connections when the beam is subject to weak axis bending, which in turn, is transferred to the column as...
-
Fall 2020
Modularization of buildings comes in several types, from prefabricated members to full volumetric models. Recently, the introduction of modular construction methods brought numerous benefits to the construction industry. Reducing construction time and costs together with improving quality and...
-
Spring 2017
During the past several decades, the relationship between microstructure and mechanical properties of high strength microalloyed steels has been extensively studied in an effort to improve the fracture toughness and strength of these types of steels, without appreciably increasing steel...
-
Effect of Cellulose Nanocrystal Particles on Rheology, Transport and Mechanical Properties of Oil Well Cement Systems
DownloadSpring 2018
The increase in oil consumption during the past few decades, coupled with oil/gas extraction from shale in the recent years has increased drilling and cementing demands. Well cementing operation is one of the most crucial and important steps in any well completion. However, since it takes place...