Search
Skip to Search Results- 1Dousti, Mohammad Reza
- 1Gomez, Juan S
- 1Neilson, David Andrew Hunter
- 1Shoaib, Abdoladel
- 1Stolz, Jonathan M
- 1Unsworth, Daniel
- 3Bindiganavile, Vivek (Civil and Environmental Engineering)
- 2Driver, Robert (Civil and Environmental Engineering)
- 1Boluk, Yaman (Civil and Environmental Engineering)
- 1Chalaturnyk, Richard J (Civil and Environmental Engineering)
- 1Grondin, Gilbert (Civil and Environmental Engineering)
- 1Li, Leijun (Chemical and Materials Engineering)
-
Fall 2019
Residual stresses can have a significant impact on the stability of structural members. In the case of I-section beam elements, such stresses can impact lateral--torsional buckling (LTB) capacity, particularly in the inelastic range. I-sections are typically fabricated by either rolling as a...
-
Effect of Cellulose Nanocrystal Particles on Rheology, Transport and Mechanical Properties of Oil Well Cement Systems
DownloadSpring 2018
The increase in oil consumption during the past few decades, coupled with oil/gas extraction from shale in the recent years has increased drilling and cementing demands. Well cementing operation is one of the most crucial and important steps in any well completion. However, since it takes place...
-
Spring 2018
This research work is focused on the characterization of the mechanical properties of 3D printed sandstone analogues produced using silica sand and binder jetting additive manufacturing technology. With control of grain size, grain size distribution, grain angularity, density distribution,...
-
Fall 2018
With growing concern over global warming and greenhouse gas emissions, research must be undertaken to reduce the environmental footprint of buildings. Cellular concrete provides good strength to weight ratios and good thermal insulation because of its cellular structure. This makes it suitable...
-
Fall 2012
Hooked end steel fibers were included between 0~1% by volume to provide enhanced shear resistance to three different types of steel fiber reinforced concrete (SFRC) namely, a regular concrete mix, a lightweight aggregate mix and a high strength mix. The test results at the material scale showed a...
-
Fall 2010
Ductile steel plate shear walls are an established lateral load resisting system. Past research indicates that cold-rolled infill panels less than 1 mm in thickness present one solution to an overstrength problem arising from selecting an infill panel thickness based on ease of welding and...