Search
Skip to Search Results- 1Black, Meghan E
- 1Borle, Steven D
- 1Caputo, Joseph V.
- 1Dousti, Mohammad Reza
- 1Dueck, Meghan, E
- 1Gomez, Juan S
- 13Department of Chemical and Materials Engineering
- 11Department of Civil and Environmental Engineering
- 6Department of Mechanical Engineering
- 1Department of Chemistry
- 1Department of Earth and Atmospheric Sciences
- 1Department of Medicine
- 5Bindiganavile, Vivek (Civil and Environmental Engineering)
- 4Mendez, Patricio (Chemical and Materials Engineering)
- 2Boluk, Yaman (Civil and Environmental Engineering)
- 2Driver, Robert (Civil and Environmental Engineering)
- 1Al-Hussein, Mohamed (Civil and Environmental Engineering)
- 1Ayranci, Cagri (Department of Mechanical Engineering)
-
A Stochastic Finite Element Analysis Framework for the Multiple Physical Modeling of Filler Modified Polymers
DownloadSpring 2021
Hamidreza Ahmadimoghaddamseighalani
Polymers have various attractive properties (e.g., low volume mass density, low cost and excellent degradation resistance), and hence, they have become essential for a wide range of applications (e.g., aerospace, oil and gas and renewable energy industries). However, due to their limited...
-
Characterization of Electroless Ni-P Coatings and Electrodeposition of Ni Coatings for Electrodes in Zinc-Air Flow Batteries
DownloadFall 2023
Electrochemical energy storage devices such as Li-ion or Zn-air batteries (ZABs) are utilized to store energy generated by renewable sources, since these sources are intermittent. Li-ion batteries uses flammable organic electrolytes (less safe than nonflammable aqueous electrolytes) and have high...
-
Fall 2019
Residual stresses can have a significant impact on the stability of structural members. In the case of I-section beam elements, such stresses can impact lateral--torsional buckling (LTB) capacity, particularly in the inelastic range. I-sections are typically fabricated by either rolling as a...
-
Spring 2014
Seven Ni-WC tubular wires utilized in this study were characterized by the nickel sheath area, powder composition, and overall initial carbide volume fraction of the wire prior to welding. The electrical resistivity of steel, stainless steel, and Ni-WC welding consumables were measured from...
-
Spring 2017
During the past several decades, the relationship between microstructure and mechanical properties of high strength microalloyed steels has been extensively studied in an effort to improve the fracture toughness and strength of these types of steels, without appreciably increasing steel...
-
Effect of Cellulose Nanocrystal Particles on Rheology, Transport and Mechanical Properties of Oil Well Cement Systems
DownloadSpring 2018
The increase in oil consumption during the past few decades, coupled with oil/gas extraction from shale in the recent years has increased drilling and cementing demands. Well cementing operation is one of the most crucial and important steps in any well completion. However, since it takes place...
-
Fall 2019
The most common detrimental processes that lead to reduction in durability in reinforced concrete elements are shrinkage, sulphate attack and chloride attack. Shrinkage is a dimensional instability chiefly caused by a loss of moisture in the hydrating cement paste. Soluble sulphate ions take part...
-
Spring 2013
The durability of concrete is one of its most important properties and has been an attractive subject for research in recent years. One of the criteria that affect concrete durability is permeability. Transport processes in concrete have been investigated for several decades. However, the...
-
Spring 2017
Heat distribution measurements in Gas Metal Arc Welding (GMAW) were concurrently measured at the cathode and anode giving increased insight and prediction capabilities. A calorimeter and water cooled cathode were used to determine energy partitions in GMAW for various electrodes, currents,...