Search
Skip to Search Results- 2Kresta, Suzanne
- 1Afshar, Shima
- 1Alberta Environmental Centre
- 1Amani, Mohammad Javad
- 1Bhushan, Vivek
- 1Black, Meghan E
- 59Graduate and Postdoctoral Studies (GPS), Faculty of
- 59Graduate and Postdoctoral Studies (GPS), Faculty of /Theses and Dissertations
- 4WISEST Summer Research Program
- 4WISEST Summer Research Program/WISEST Research Posters
- 2Oil Sands Research and Information Network (OSRIN)
- 1Oil Sands Research and Information Network (OSRIN)/Government of Alberta Reports
-
Development of an Experimental Apparatus for Studying the Effects of Acoustic Excitation on Viscosity
DownloadFall 2012
An experimental apparatus was developed capable of measuring changes in fluid viscosity occurring due to acoustic stimulation. Controls allowed measurements at simulated oil sand reservoir pressures and temperatures with near real-time data visualization. Calibration was performed...
-
Fall 2020
Concerns over the environmental impacts of thermal production methods for bitumen and heavy oil have led to the exploration of alternative technologies including solvent-assisted production methods. While solvent-assisted production methods have been studied extensively, apparent diffusion rates...
-
Spring 2014
In bitumen recovery from oil sands, a percentage of the bitumen is lost to tailings. The effect of fugitive bitumen on fines settling and consolidation in tailings ponds remains controversial. In the current study, the settling performance of mature fine tailings (MFT) in response to flocculant...
-
Fall 2009
The extraction of bitumen (heavy oil) from the oil sands is predominantly achieved through a water-based technology. This involves a slurrying process, typically called conditioning, which is categorized into three equally important steps: bitumen-sand liberation, bitumen coalescence, and...
-
Spring 2017
The formation of stable water-in-oil emulsions during oil sands extraction process causes a number of operational issues, such as equipment corrosion, storage and transportation problems. One common method for emulsion breakup in industry is to use chemical demulsifiers. The chemical demulsifiers...
-
Spring 2011
Extraction of hydrocarbons from an Athabasca oil sand slurry were conducted using supercritical carbon dioxide (SC-CO2). The oil sand was slurried to a 1:1 ratio with water and experiments were conducted using a laboratory-scale batch supercritical fluid extraction (SFE) system. Preliminary tests...
-
Heavy Oil/Bitumen Recovery by Alternate Injection of Steam and Solvent (Hydrocarbon and CO2) in Fractured Carbonates and Oilsands
DownloadFall 2013
The world energy demand is constantly increasing and fossil fuels are still by far the main energy resource that supplies the world energy consumption market, therefore increasing oil recovery from all types of reservoirs is an important matter. The burning of fossil fuels for energy purposes, on...
-
High-Float Emulsion Residue: A New Rheological Model Based on the Existence of a Yield Stress
DownloadFall 2016
“High-float” (HF) emulsions are dispersions of micron-sized bitumen droplets in water, with a special type of anionic surfactant functioning as stabilizer. By allowing the water to evaporate from an HF emulsion, what remains is called a “high-float emulsion residue.” Although indistinguishable in...