Search
Skip to Search Results- 118Chemical and Materials Engineering, Department of
- 113Chemical and Materials Engineering, Department of/Research Articles and Materials (Chemical and Materials Engineering)
- 8Surgery, Department of
- 8Surgery, Department of/Orthopaedic Surgery
- 5Chemical and Materials Engineering, Department of/Process Systems Engineering
- 3Human Ecology, Department of
- 14Rapid Solidification
- 12Impulse Atomization
- 11Undercooling
- 8Cryopreservation
- 7Atomization
- 7Microstructure
-
2012
Elliott, J. A., Zhou, X., McGann, L. E., Adesida, A. B., Abazari, A., Law, G. K., Laouar, L., Forbes, J. F., Jomha, N. M., Maghdoori, B.
Articular cartilage injuries do not heal and large defects result in osteoarthritis with major personal and socioeconomic costs. Osteochondral transplantation is an effective treatment for large joint defects but its use is limited by the inability to store cartilage for long periods of time....
-
2017-03-01
Lu, Ziyang, Schaarsberg, Martin H. Klein, Zhu, Xiaojue, Zhang, Xuehua
We report the self-organization of universal branching patterns of oil nanodroplets under the Ouzo effect [Vitale S, Katz J (2003) Langmuir 19:4105–4110]—a phenomenon in which spontaneous droplet formation occurs upon dilution of an organic solution of oil with water. The mixing of the organic...
-
2017-11-01
Khodaie, N., Ivey, D.G., Henein, H.
Dilatometry is the most accurate and common method for measuring the kinetics of phase transformations in solid specimens. Despite the development of a more accurate technique, an inferior method, i.e., the lever rule, is widely used in the scientific community to interpret raw dilatometry data....
-
2017-01-01
Spinelli, J.E., Bogno, A.-A., Henein, H.
Hypereutectic Al-18wt.%Si alloy is widely used in automotive industry as a wear resistant alloy for engine components. However, in the last few years, this traditional composition is being considered for processing by different rapid solidification methods. Positive points include its low thermal...
-
Transverse Strain Aging Behaviour of Uncoated Thick Walled X70 UOE Microalloyed Steel Pipes
Download2018-01-01
Wiskel, J.B., Ma, J., Ivey, D.G., Henein, H.
Transverse tensile samples were extracted from the centreline position of three different compositions of uncoated thick walled microalloyed X70 UOE pipe at a location 180° from the weld. Aging heat treatments of 5, 15, and 25 minutes and temperatures of 175, 215, and 255°C were applied. Tensile...
-
Time Dependence of Hydrogen Induced Cracking of X70 Pipeline Steel under Severe and Mild Sour Service Conditions using Ultrasonic Analysis
Download2020-01-01
Gawor, S., Wiskel, J.B., Ivey, D.G., Liu, J., Henein, H.
A standard NACE hydrogen induced crack test was used to evaluate the resistance of two compositions of X70 steel (X70-X (Ca/S ratio of 2.5) and X70-B (Ca/S ratio of <0.5)) under severe (pH = 2.7 and 100% H2S) and mild (pH = 5.5 and 100% H2S) sour service conditions. An ultrasonic technique was...
-
2015-06-01
Zhang, Xuehua, Crivoi, Alexandru, Duan, Fei
Experimental atomic force microscopy (AFM) images show the dried-in patterns from amino acid solutions which can be in the form of dots or networks. The three-dimensional lattice-gas Kinetic Monte Carlo (KMC) model is applied to simulate the formation of dot-like and network-like particle...
-
Thermophysical properties and containerless 2 solidification of Al-22.5wt%Cu in reduced gravity using the ISS-EML
Download2023-01-01
Champdoizeau, Q., Valloton, J., Henein, H.
A hypoeutectic Al–22.5 wt pctCu sample was processed using the Electro-Magnetic Levitator on board of the International Space Station within the frame of the European Space Agency projects NEQUISOL and THERMOLAB. In total, 21 cycles of melting and cooling were carried out, with the last cycle...
-
The Effect of Skelp Thickness on Precipitate Size and Morphology for X70 Microalloyed Steel Using Rietveld Refinement (Quantitative X-ray Diffraction)
Download2018-01-01
Chatelier, C., Wiskel, J.B., Ivey, D.G., Henein, H.
Precipitates in thin-walled (11 mm) and thick-walled X70 (17 mm) microalloyed X70 pipe steel are characterized using Rietveld refinement (a.k.a. quantitative X-ray diffraction (QXRD)), inductively coupled plasma mass spectrometry (ICP), and energy-dispersive X-ray spectroscopy (EDX) analyses....
-
The Discharge Crucible Method: update on experimental design, measurements, and orifice wetting
Download2022-01-01
The physicochemical properties, viscosity, density, and surface tension, are critical properties of liquid metals and alloys. These properties are needed for thermodynamics, solidification modelling, and materials properties databases. The discharge crucible method (DC) developed in 2003 has been...