Search
Skip to Search Results- 1Badiozamani Tari Nazari, Mohammad Mahdi
- 1Baker, Kathleen E.N.
- 1Beier, Nicholas A
- 1Boudreau, Wyatt
- 1Brown, Lisa D
- 1Collins, Catherine
- 12Department of Chemical and Materials Engineering
- 8Department of Civil and Environmental Engineering
- 1Department of Biological Sciences
- 1Department of Earth and Atmospheric Sciences
- 1Department of Electrical and Computer Engineering
- 1Department of Mechanical Engineering
- 2Soares, Joao (Chemical and Materials Engineering)
- 1Beier, Nicholas (Civil and Environmental Engineering)
- 1Beier,Nicholas
- 1Belosevic, Miodrag (Biological Sciences)
- 1Choi,Phillip (Chemical and Materials Engineering)
- 1Dr. Hooman Askari-Nasab (Department of Civil and Environmental Engineering, University of Alberta)
-
Development of compact fluorescent spectrometers and field deployable optical solids content monitoring devices
DownloadSpring 2015
Two techniques were used to develop industrial and environmental sensing devices: fluorescence spectrometry and light scatter. The focus of the thesis is to develop real-time, portable and economical sensors using these techniques for environmental detection and management of tailings slurries. A...
-
Effects of Surface Contamination and Water Chemistry on the Behaviors of Illite, Kaolinite and Montmorillonite in Organic and Aqueous Media
DownloadSpring 2016
Clays, due to their specific surface area and electrical charge density, are among the most active minerals in aquifers, oil and gas reservoirs, and tailings ponds. Clays, in tailings, are a significant ongoing environmental concern in the mining and oil sands production industries and clay...
-
Spring 2019
This research aims to improve oil sands tailings treatment by applying a combination of quick lime (calcium oxide) and anionic or cationic polymers in the flocculation process. A procedure including mixing lime, dilution of mature fine tailings (MFT) in the lime supernatant and addition of...
-
Freezing Characteristics of Mine Waste Tailings and their Relation to Unsaturated Soil Properties
DownloadSpring 2018
The study investigated the feasibility of using the soil freezing characteristic curve (SFCC) to estimate the soil water characteristic curve (SWCC) in mine waste tailings as an alternative to traditional SWCC testing. Traditional SWCC tests are challenging and time-consuming to conduct, taking...
-
Spring 2012
Tailing ponds in Northern Alberta has covered an area of 170 km2. Directive 074 issued in 2009 set stringent criteria for tailings reclamation. Freeze-thaw dewatering is one of the most promising approaches for dewatering MFT as one cycle of freeze-thaw can release up to 50% pore water. In this...
-
Spring 2013
The mining of oil sands ore and extraction of bitumen produces aqueous slurries containing bitumen, coarse sand and fine clays. The performance of key process units is highly dependent on the rheology of “carrier fluid”, which is comprised of the fine solids and water. Although viscosity is...
-
Fall 2017
The focus of the research presented here was to directly measure actual evaporation rates from a tailings surface using a micrometeorological technique known as the eddy covariance method. Depending on the results, it would be determined whether current drying models need to be calibrated with...
-
Methane Production and Emission Mitigation in Oil Sands Tailings Concurrent with Hydrocarbon Degradation under Nitrogen Limited Conditions
DownloadFall 2020
Alberta’s oil sands generate large volumes of tailings from bitumen ore processing. These tailings ponds produce biogenic methane, which can be measured across 60-80% of the tailings surface. Based on current surface area data and emissions studies, tailings ponds could account for 8% of Canada’s...
-
Morphological Effects of Water Soluble Polymer Flocculants Synthesized by Controlled Reversible-Deactivation Radical Polymerization for Treatment of Mature Fine Tailings
DownloadFall 2020
The bitumen reserves in Northern Alberta are a valuable asset, but extracting bitumen from oil sands via the Clark hot water process produces undesirable waste tailings. These tailings are transported to tailings ponds where the sand and clay particles are left to settle slowly, creating a...
-
Spring 2017
Oilsands tailings are a waste product comprising primarily a stable alkaline suspension of clay in water. This waste product of oilsands mining is environmentally hazardous to store and expensive to safely dispose of. This work presents two novel ideas for dealing with the waste. The first is...