Search
Skip to Search Results- 1Afshar, Shima
- 1Aghaie, Ermia
- 1Aldhaleai, Ahmed Mahmood
- 1Baker, Kathleen E.N.
- 1Baldygin, Aleksey
- 1Bhargava, Aakanksha
- 26Department of Chemical and Materials Engineering
- 13Department of Civil and Environmental Engineering
- 11Department of Mechanical Engineering
- 5Department of Renewable Resources
- 4Department of Earth and Atmospheric Sciences
- 1Chemical and Materials Engineering
- 4Zeng, Hongbo (Chemical and Materials Engineering)
- 3Liu, Qingxia (Chemical and Materials Engineering)
- 3Xu, Zhenghe (Chemical Engineering)
- 3Xu, Zhenghe (Chemical and Materials Engineering)
- 2Gray, Murray (Chemical and Materials Engineering)
- 2Ulrich, Ania (Department of Civil and Environmental Engineering)
-
Fall 2013
The high degree of variability of oil sands ores can be attributed to a mixture of different geological end members, i.e., estuarine sand, estuarine clay, marine sand and marine clay. This study focused on the mineralogy, especially of clay minerals, and toluene insoluble organic matter, referred...
-
Characterization of Clay Minerals in the Athabasca Oil Sands in Water Extraction and Nonaqueous Solvent Extraction Processes
DownloadFall 2011
Production of oil from the second largest oil deposit in the world, i.e., the Alberta oil sands containing approximately 13% of total proven oil reserves in the world (169.9 billion barrels), has been shown to be significantly influenced by clay minerals. Clay minerals in particular play a key...
-
Colloid Science of Sand Remediation: A Study Motivated by the Non-Aqueous Extraction of Bitumen from Oil Sands
DownloadFall 2014
The current water-based method of bitumen extraction requires withdrawal of fresh water from the Athabasca River — a practice which leads to the continual buildup of tailings ponds and other environmental concerns. As Alberta’s bitumen production is expected to more than double by 2020, there is...
-
Fall 2017
The present research was conducted with the intent of evaluating the degradation of OCTG (Oil Country Tubular Goods) steel used in SAGD (Steam Assisted Gravity Drainage) applications, and developing a promising surface modification method and a novel composite coating using a technique that will...
-
Fall 2014
The formation of stable water-in-oil emulsions during bitumen extraction poses problems for water separation from diluted bitumen, which leads to equipment corrosion and catalyst fouling in downstream operations. Demulsifiers are used to break the stable emulsions and assist the separation of...
-
Spring 2014
Seven Ni-WC tubular wires utilized in this study were characterized by the nickel sheath area, powder composition, and overall initial carbide volume fraction of the wire prior to welding. The electrical resistivity of steel, stainless steel, and Ni-WC welding consumables were measured from...
-
Spring 2019
This thesis aims to demonstrate the feasibility of using System Dynamics (SD) techniques to develop a transparent, open-source and reproducible model capable of simulating long-term soil water dynamics in a tailings-cap system subject to upward flux from a consolidating tailings substrate. The...
-
Dynamic Demulsification Mechanism of Asphaltene-Stabilized Water-in-Oil Emulsions by Ethylcellulose
DownloadFall 2015
In previous studies, nontoxic and biodegradable ethylcellulose (EC) was shown to be capable of breaking water-in-diluted bitumen emulsions. Nevertheless, the demulsification mechanism of EC has not been correlated to its effect on the physical properties of stabilizing interfacial asphaltene...
-
Fall 2012
Stabilization of water droplets in froth treatment process results in poor de-watering efficiency and potentially affects final bitumen quality. The purpose of this research is to study the effect of solid contamination by diluted bitumen on water droplet stabilization in water in oil emulsions....
-
Spring 2022
This study investigated the mechanisms driving the dewatering and strength behaviour of polymer amended treated (centrifuged and in-line thickened tailings/ILTT) deep tailings deposits undergoing seasonal weathering dominated by a) multiple freeze-thaw cycles and b) alternating freeze-thaw and...