Search
Skip to Search Results- 1Aghaie, Ermia
- 1Ahmed, Ezz Q
- 1Arango Vasquez,Daniela
- 1Behnamian, Yashar
- 1Bineshmarvasti, Baher
- 1Chen, Xueyuan
- 6Luo, Jingli (Chemical and Materials Engineering)
- 5Chen, Weixing (Chemical and Materials Engineering)
- 5Henein, Hani (Chemical and Materials Engineering)
- 2Li, Dongyang (Chemical and Materials Engineering)
- 2Mitlin, David (Chemical and Materials Engineering)
- 2Thundat, Thomas (Chemical and Materials Engineering)
-
Fall 2015
The present research has been done with the intent of evaluating the corrosion resistance and cracking susceptibility of some commercial candidate alloys that can be potentially used in Gen-IV supercritical water reactor (SCWR). The mechanism of the crack initiation in austenitic alloys exposed...
-
Corrosion Assessment and Mechanisms of Materials in Pre-hydrolysis and Hydrothermal Liquefaction Biorefining Systems
DownloadFall 2022
Advanced biomass conversion technologies, including hot dilute acidic pre-hydrolysis and hydrothermal liquefaction, have been developed for the generation of renewable bioenergy products and biochemicals from existing biomass resources and biowastes. However, the deployment of the technologies is...
-
Spring 2013
As the Supercritical Water-cooled Reactor (SCWR) shows a promising future, the corrosion behavior of candidate materials has attracted great interest. In this study, experimental investigation was conducted to evaluate the corrosion behavior of the ferritic-martensitic steels designed for the use...
-
Spring 2017
Severe localized corrosion was found throughout an aeration tank of a modular wastewater treatment plant. Specifically, pitting, crevice corrosion, galvanic corrosion, and intergranular corrosion (IGC) were observed on the 5000 and 6000 series aluminum alloys used in the tank’s construction. One...
-
Spring 2015
This thesis presents a thorough examination of the corrosion and fouling behaviour of crude oil at refining conditions on industrially applicable heat transfer surfaces. The depletion of light sweet crude oil reserves means that the processing of ever heavier and more sour crude oils is...
-
Corrosivity and Thermal Stability of Biocrude Oil for Co-Processing in FCC Feedlines: An Investigation and Risk Assessment
DownloadSpring 2023
Fast pyrolysis bio-oil is a promising renewable energy source derived from biomass. However, its high corrosivity and poor thermal stability have limited its widespread use as a drop-in fuel. One promising method for transforming low-quality biocrudes into drop-in fuels is co-processing with...
-
Fall 2017
The present research was conducted with the intent of evaluating the degradation of OCTG (Oil Country Tubular Goods) steel used in SAGD (Steam Assisted Gravity Drainage) applications, and developing a promising surface modification method and a novel composite coating using a technique that will...
-
Fall 2015
Mechanical, tribological and corrosion properties of metallic materials are of significance to their industrial applications and have been studied for long time. Efforts are continuously made to correlate these properties to more fundamental parameters in order to effectively improve the...
-
Fall 2022
The application of dissolvable materials is becoming widely used in hydraulic fracturing, especially in low permeability reservoirs. To date, most of the DAs are based on Al alloys (AAs) or Mg alloys, which offer desirable dissolvability, yet limited mechanical properties. This work aims to...
-
Effects of Oxide Additions on the Corrosion Behaviour of Cr2O3 Based Ceramics in High Temperature Supercritical Water Environment
DownloadFall 2012
This investigation is aimed at developing ceramic materials applied in supercritical water, which is being considered as coolant for one of the next generation nuclear reactors. Cr2O3, a primary protective film on stainless steels, was found to be unstable in SCW due to the formation of soluble...