Search
Skip to Search Results- 1ALBAHLANI, ALMUATASIM MOHAMMED
- 1Alizadehgiashi, Moien
- 1Athar, Khan S
- 1Baron, Corey A
- 1Beaton, Neil I.
- 1Boddez, Jason Bradley
- 9Department of Chemical and Materials Engineering
- 9Department of Mechanical Engineering
- 5Department of Civil and Environmental Engineering
- 4Department of Electrical and Computer Engineering
- 2Department of Agricultural, Food, and Nutritional Science
- 2Department of Biomedical Engineering
- 2Babadagli, Tayfun (Department of Civil and Environmental Engineering)
- 2Beaulieu, Christian (Biomedical Engineering)
- 2Koch, Bob (Mechanical Engineering)
- 2Lange, Carlos (Mechanical Engineering)
- 2Rinaldi, Christina (Educational Psychology)
- 2Tavakoli, Mahdi (Electrical and Computer Engineering)
-
Estimating Diffusion Coefficients And Visualizing Interactions In Propane-Heavy Oil Systems
DownloadSpring 2019
Unconventional oil (mainly heavy oil, extra heavy oil and bitumen) represents a significant share of global oil reserves. Due to their high viscosity, efficient recovery of oil from these reserves is challenging and remains an issue of ongoing global research. Thermal recovery methods are...
-
Fall 2015
Folding of biomolecules is an important problem in structural biology. The physical folding can be projected as a diffusive search over an energy landscape whose dimensions scale by all the internal degrees of freedom which a biomolecule possesses. To explore this idea, folding is studied from...
-
Fundamental Insights into the Structure and Dynamics of Confined Substrates inside Silica Nanostructures, using a combination of Molecular Dynamics and Grand Canonical Monte Carlo Simulations
DownloadFall 2021
Condensed phase reactions in the presence of heterogeneous catalysts are widely performed for the conversion of biomass into useful intermediates and value-added products. Specifically, nanoporous catalysts have garnered interest for liquid-phase oxidation, hydrogenation, dehydrogenation and/or...
-
Improvement of thermal heavy-oil recovery in sandstone and carbonate reservoirs using hydrocarbon solvents
DownloadFall 2011
ALBAHLANI, ALMUATASIM MOHAMMED
This thesis introduces a new approach for heavy-oil recovery from fractured reservoirs: Steam-Over-Solvent Injection in Fractured Reservoirs (SOS-FR). The SOS-FR technique is a new technology proposed as an alternative method to the sole injection of steam or solvent and consists of three...
-
Fall 2018
Dual-fuel Reactivity Controlled Compression Ignition (RCCI) combustion is investigated as an efficient combustion mode on a modified 4-cylinder production Gasoline Direct Injection (GDI) engine. RCCI uses Low-Temperature Combustion (LTC) to provide high efficiency combustion while avoiding NOx...
-
Spring 2016
A dual-fuel system is used to control HCCI combustion timing and load in a CFR engine. The systems steady-state response to iso-octane and n-heptane injected energy is investigated then a dynamic ARMAX model is found using system identification. This model is used to design a norm-optimal...
-
Lab to Field Scale Modeling of Low Temperature Air Injection with Hydrocarbon Solvents for Heavy-Oil Recovery in Naturally Fractured Reservoirs
DownloadFall 2015
Alternatives for enhanced oil recovery processes in heavy oil containing deep naturally fractured reservoirs (NFR) are limited due to excessive heat losses when steam is injected. Air injection at high temperature oxidation conditions (in-situ combustion) has been considered as an alternative to...
-
Spring 2010
The demand for accurate bitumen-pentane mass transfer data was the main motivation behind this research. Difficulties such as complex phase behavior, high viscosity and opacity of the hydrocarbon invariably lead to failure of conventional techniques to measure mass transfer coefficients...
-
Spring 2013
In this thesis, methods for improving needle steering during prostate brachytherapy are studied. Brachytherapy is a minimally-invasive, out-patient therapy for prostate cancer treatment with a fast recovery time. Success of brachytherapy depends on precise placement of needle tips in pre-planned...