Search
Skip to Search Results- 1Adesanwo, Toluwanise I J
- 1Afshar, Shima
- 1Agbor, Ezinwa U
- 1Aghaie, Ermia
- 1Akbarzadeh Kasani, Hossein
- 1Apan, Ioan-Tudor
- 25Department of Chemical and Materials Engineering
- 14Department of Civil and Environmental Engineering
- 9Department of Mechanical Engineering
- 5Department of Renewable Resources
- 4Department of Earth and Atmospheric Sciences
- 1Chemical and Materials Engineering
- 4Gupta, Rajender (Chemical and Materials Engineering)
- 2Amirfazli, Alidad (Mechanical Engineering)
- 2De Klerk, Arno (Chemical and Materials Engineering)
- 2Liu, Qingxia (Chemical and Materials Engineering)
- 2McCaffrey, William (Chemical and Materials Engineering)
- 2Mitra, Sushanta (Mechanical Engineering)
-
Spring 2019
This thesis aims to demonstrate the feasibility of using System Dynamics (SD) techniques to develop a transparent, open-source and reproducible model capable of simulating long-term soil water dynamics in a tailings-cap system subject to upward flux from a consolidating tailings substrate. The...
-
Spring 2013
Removal of a drop from its substrate may be gradually (e.g. evaporation) or all at once (e.g. shedding). In this thesis, drop adhesion force as a base for understanding the all at once removal of a drop from its substrate, and drop evaporation in room temperature as one of the gradual removal...
-
Dynamics of spontaneous initial spreading and spreading of a hydrodynamically driven droplet under the influence of surrounding pressure
DownloadFall 2021
We investigate experimentally the early time dynamics of spontaneous spreading of silicone oils with various viscosities at elevated surrounding pressures. The surrounding medium pressure is increased in a monotone fashion starting from atmospheric pressure to a maximum value of 30 megapascal...
-
Effect of Temperature, Phase Change, and Chemical Additive on Interfacial Properties and Performance of Steam Applications
DownloadFall 2019
When considering the wettability state during steam applications, we find that most issues remain unanswered. Removal of polar groups from the rock surface with increasing temperature improves water wettability; however, other factors, including phase change, play a reverse role. In other words,...
-
Spring 2020
Albertan oil sands ores are becoming more difficult to process efficiently as the clay content of the ore increases and the grade of the ore worsens. A key to improving the extraction of bitumen from low-grade oil sands, thereby increasing the longevity of this critical resource, is reducing the...
-
Estimation of the Life Cycle Greenhouse Gas Emissions of Bitumen-Derived Petroleum Fuels using Enhanced Solvent Extraction Incorporating Electromagnetic Heating (ESEIEH) and Toe-to-Heel Air Injection (THAI) Extraction Technologies
DownloadSpring 2019
There is increased focus on reduction of greenhouse gas (GHG) emissions to reduce global warming. Combustion of fossil fuels are a key contributor to emissions of GHG. Alberta is the largest hydrocarbon base in North America due to its oil sands deposit. Bitumen from oil sands is refined to...
-
Spring 2015
Previous studies on the extraction of liquid products from coals have focused mainly on increasing the yield, with very little emphasis on the quality of the liquid products. The main goal of this study is to achieve a balance between the yield and quality of the coal derived liquids. The first...
-
Extraction of Hydrocarbons from Bitumen and Bitumen-containing Process and Process Waste Streams using Supercritical Carbon Dioxide
DownloadSpring 2019
Extractions of hydrocarbons from bitumen and bitumen-containing process and process waste streams generated from surface mined oil sands were conducted using supercritical carbon dioxide (SC-CO2). Dynamic extractions were performed on a bench-scale batch supercritical fluid extraction (SFE)...
-
Fabrication and Characterization of Photolithographically Patterned Rough Surfaces Demonstrating Extreme Contact Angle Behavior
DownloadFall 2014
This thesis features experimental work done to fabricate and characterize silicon surfaces patterned using photolithographic techniques, both standard and novel, to produce a variety of surfaces with roughness of controlled geometric properties. In specific, one set of the surfaces fabricated...
-
Fall 2011
The fragmentation of large coal particles at high temperature is important to the efficient operation of Corex process of steelmaking, which uses raw coal instead of coke. The hypothesis is that the heterogeneity within coal particles affects the fragmentation. The interface of minerals and coal...